CARD Mode-43-Using File Search Mode1 Set [CARD FUNCTIONS] >>[CARD EDITING] >> [FILE SEARCH] >>[YES].2 Turn the [PUSH] Dial (38) and select thedesired file number, and press the [PUSH]Dial (38).≥For other notes concerning this item, see -59-.Recording Pictures on a Card to aTapeCard Images can be recorded on the Tape one ata time or all automatically.After setting to Card Playback Mode, please carryout the following procedures.To Copy 1 Picture1 Slide the [TAPE/CARD/CARD MODE]Selector (27) to [CARD MODE] until the[PICTURE] Indication appears.2 Display a desired picture.3 Set the [TAPE/CARD/CARD MODE] Selector(27) to [TAPE].4 Press the [PHOTO SHOT] Button (26).≥During the copying, the Indication appears.≥It takes a few seconds to record a picture tothe Tape.MENUPUSHMF/VOL/JOGWB/SHUTTER/IRIS/(46) (38)TAPE CARD CARDMODE(27)TAPE CARD CARDMODE(27)PHOTOSHOT(26)NOW RECORDINGREC≥When recording to tape, select the tape positionbefore recording. The picture will be recorded tothe tape position when the [PHOTO SHOT]Button is pressed at Step 4.To Copy All the Pictures1 Slide the [TAPE/CARD/CARD MODE]Selector (27) to [CARD MODE] until the[PICTURE] Indication appears.2 Display the first picture.≥If a picture other than the first one isdisplayed, only the subsequent pictures willbe copied.3 Set [CARD FUNCTIONS] >>[CARD EDITING] >> [RECORD TO TAPE] >>[YES].≥During the copying, the Indication appears.≥It takes a few seconds for each picture to becopied on the Tape. To stop the copyingmidway, press the [∫] Button.≥Moving Picture (MPEG4) and Voice data cannotbe recorded from a Card to tape.≥For other notes concerning this item, see -60-.Slide ShowThe recorded still pictures in the Card can beplayed back like a Slide Show.To Play Back All the Pictures Continuously1 Slide the [TAPE/CARD/CARD MODE]Selector (27) to [CARD MODE] until the[PICTURE] Indication appears.TAPE CARD CARDMODE(27)NOW RECORDINGRECTAPE CARD CARDMODE(27)