Panasonic NV-GS40 Operating Instructions Manual

Contents

Others-53-Initializing the ModesYou can change the Menu settings back to theshipping condition.1 Set [CAMERA FUNCTIONS] >>[OTHER FUNCTIONS2] >> [INITIAL SET] >>[YES].≥The initializing takes for a while.≥After the initializing is completed, the[COMPLETED] Indication appears withbeeps.≥Initializing will not erase the Owner ID settingand the clock setting (-17-) that has beenadjusted.Warning/Alarm IndicationsIf any one of the following indications lights up orflashes, please check the condition of the MovieCamera.3: Condensation has occurred. -62-Y: The accidental erasure prevention slider onthe inserted Cassette is open (that is, set to[SAVE]).You are about to do audio dubbing on theunrecorded (blank) portion of the tape.No Cassette is inserted. -12-6: The Battery is low. Recharge it. -9-0: The built-in battery is low. -17-:: The video heads are dirty. -62-2END:The tape came to end during recording.REMOTE:Wrong Remote Controller Mode has beenselected. -9-UNPLAYABLE TAPE(OTHER FORMAT):You are attempting to play back a tapesection that has been recorded with adifferent TV system.UNABLE TO A. DUB(LP RECORDED):Because the original recording was done inLP Mode, audio dubbing cannot beperformed.INCOMPATIBLE TAPE:This Cassette is incompatible.PLEASE RE-OPERATEAFTER PUSHINGRESET BUTTON:Mechanism Irregular is detected. Press the[RESET] Button (-7-). This may solve theproblem.TO SERVICE:It is a malfunction.CARD FULL:Card does not have sufficient memoryremaining.Select Card Mode and delete unnecessaryfiles.NO CARD:Card is not inserted.NO FILE:Card has no files recorded on it.UNPLAYABLE CARD:You are attempting to play back a datawhich is not compatible with this MovieCamera.CARD ERROR:This Card is not compatible with this MovieCamera.COPY INHIBITED:Because the medium is protected by a copyguard, images cannot be recordedcorrectly.INCORRECTOPERATION:You are attempting to record to a tape inVCR Mode.You are pressing the [PHOTO SHOT]Button in MPEG4 Recording or VoiceRecording.You are attempting to record to a tape inCard Mode.CONNECT USB CABLE:The [WEB CAMERA] on the[CAMERA SETUP] Sub-Menu of the[CAMERA FUNCTIONS] Main-Menu is setto [ON] with USB Cable unconnected.Connect the USB Cable to the MovieCamera and the Personal Computer.DISCONNECT USB CABLE:You are pressing the Recording Start/StopButton, the [PHOTO SHOT] Button or the[TITLE] Button in the WEB CAMERA Mode.You are pressing the [TITLE] Button inCamera Mode or VCR Mode with a USBCable connected.You are attempting to record on a Card witha USB Cable connected.CANCEL WEB CAMERA MODE:It is not possible to operate the[OFF/ON/MODE] Switch in the WEBCAMERA Mode.