With a PC-49-With a PCUSB Connection KitUsing the supplied USB Connection Kit, you canimport still pictures into your personal computer.≥Do not connect the USB Cable until the USBdriver is installed.1 Install the supplied USB driver.2 Set the Movie Camera to Card PlaybackMode.3 Set the Movie Camera to Still PlaybackMode.4 Connect the supplied USB Cable to [ ]Socket (30).≥It enters PC connection mode.≥The USB Connection Kit can be used withWindows98 Second Edition/Me/XP.≥Use AC Adaptor as power source for the MovieCamera. (The Card or its contents may bedestroyed if battery power is lost whiletransmitting data.)≥Mode cannot be changed in PC connectionmode by operating [OFF/ON/MODE] Switch.≥For more details on the operating environment,installation, connections, and procedures,please refer to USB Connection Kit’s operatinginstructions.≥To disconnect the USB Cable safely,double-click the [ ] Icon in the task tray andfollow the instructions on the screen.Using as a Web CameraIf the Movie Camera is connected to yourPersonal Computer, you can send video from theMovie Camera to the other parties via thenetwork.≥Do not connect the USB Cable until the USBdriver is installed.1 Install the supplied USB driver.2 Set the Movie Camera to Camera Mode.DVS-VIDEOIN/OUT(30)3 Connect the supplied USB Cable to [ ]Socket (30).4 Set [CAMERA FUNCTIONS] >>[CAMERA SETUP] >> [WEB CAMERA] >>[ON].≥It enters WEB CAMERA Mode.5 Start the NetMeeting.≥When using as a web camera, it is not possibleto record on a tape or a card or display a title.≥When the LCD Monitor is opened and rotatedfrontward in the WEB CAMERA Mode, theViewfinder becomes disactivated.≥For more details on the operating environment,installation, connections, and procedures,please refer to USB Connection Kit’s operatinginstructions.Using a Card in a PersonalComputerWhen using Card Data recorded with this MovieCamera, please note the following points.≥To erase pictures that you recorded on the Cardby using the Movie Camera, be sure to erasethem on the Movie Camera, not on thecomputer.≥Using the optional DV Editing Software (MotionDV STUDIO) for Windows (VW-DTM20/21/22),variety of visual effects can be added and titlecan be created.≥You may not be able to properly play back orsearch the images on the Movie Camera afterediting the recorded data or changing the imagedata on a personal computer.≥The image data files recorded on the Card withthis Movie Camera conform to the DCF (Designrule for Camera File system) stipulated byJEITA (Japan Electronics and InformationTechnology Industries Association).DVS-VIDEOIN/OUT(30)MENUPUSHMF/VOL/JOGWB/SHUTTER/IRIS/(46) (38)