Panasonic NV-GS40 Operating Instructions Manual

Contents

CARD Mode-41-3 Start playback and press the RecordingStart/Stop Button (44) at the desired scene.Selecting the quality of MPEG4 Recordingimages1 Set [CAMERA FUNCTIONS] or[VCR FUNCTIONS] >> [CARD SETUP] >>[MPEG4 MODE] >> a desired image quality.Maximum recording time on the suppliedCard (8MB)[SUPERFINE]: approximately 1 minute and30 seconds[FINE]: approximately 2 minutes[NORMAL]: approximately 6 minutesª Recording Voice (Voice RecordingFunction)You can record voice data on a Card. (CameraMode only)1 Set the [TAPE/CARD/CARD MODE] Selector(27) to [CARD].2 Slide the [TAPE/CARD/CARD MODE]Selector (27) to [CARD MODE] until the[VOICE] Indication appears.3 Press the Recording Start/Stop Button (44).≥Voice from built-in microphone is recorded.≥It takes 2 to 3 seconds to start recording.≥The recorded file is automatically locked (toprevent accidental erasure).≥Voice from external microphone connected tothe [MIC] Socket can also be recorded.≥During recording, the [ ] Indication is lit inred.(44)MENUPUSHMF/VOL/JOGWB/SHUTTER/IRIS/(46) (38)TAPE CARD CARDMODE(27)(44)VOICE≥When Remaining Time Indication becomes[R:0h00m], this Indication flashes in red.Recording may not be started.Maximum recording time on the suppliedCard (8MB)Approximately 24 minutes≥For other notes concerning this item, see -59-.Playing Back a CardIt plays back files recorded on a Card.≥When you set the Movie Camera to CardPlayback Mode, the Card Contents aredisplayed to inform you which kind(s) of data(still picture, moving picture and/or voice data)are recorded on the Card.1 Set the Movie Camera to Card PlaybackMode.≥The [CARD PB] Lamp (45) lights up.2 Slide the [TAPE/CARD/CARD MODE]Selector (27) to [CARD MODE] until[PICTURE], [MPEG4] or [VOICE] Indicationappears.3 Start Playback.[PICTURE]:1: Starting the Slide Show5: Playing back the next picture6: Playing back the previous picture∫: Stop the Slide ShowCARD CONTENTSPICTUREMPEG4VOICEOFFONMODECAMERAVCRCARDPB(43)(45)TAPE CARD CARDMODE(27)