Panasonic PT-DW740E Operating Instructions Manual

Also see for PT-DW640E: Operating instructions

Contents

Panasonic PT-DW740E Operating Instructions Manual Manual pdf 103 page image

ENGLISH - 103Chapter 4 Settings — [NETWORK] menuContents of mail sentExample of E-mail sent when E-mail is setThe following E-mail is sent when the E-mail settings have been established.=== Panasonic projector report(CONFIGURE) ===Projector Type : DW740Serial No : SH1234567----- E-mail setup data -----TEMPERATURE WARNING SETUPMINIMUM TIME at [ 60] minutes intervalINTAKE AIR TEMPERATURE Over [ 45C / 113F ]ERROR [ OFF ]LAMP1 RUNTIME [ OFF ] at REMAIN [ 400] HLAMP1 RUNTIME [ OFF ] at REMAIN [ 200] HLAMP2 RUNTIME [ OFF ] at REMAIN [ 400] HLAMP2 RUNTIME [ OFF ] at REMAIN [ 200] HINTAKE AIR TEMPERATURE [ OFF ]PERIODIC REPORTSunday [ OFF ] Monday [ OFF ] Tuesday [ OFF ] Wednesday [ OFF ]Thursday [ OFF ] Friday [ OFF ] Saturday [ OFF ]00:00 [ OFF ] 01:00 [ OFF ] 02:00 [ OFF ] 03:00 [ OFF ]04:00 [ OFF ] 05:00 [ OFF ] 06:00 [ OFF ] 07:00 [ OFF ]08:00 [ OFF ] 09:00 [ OFF ] 10:00 [ OFF ] 11:00 [ OFF ]12:00 [ OFF ] 13:00 [ OFF ] 14:00 [ OFF ] 15:00 [ OFF ]16:00 [ OFF ] 17:00 [ OFF ] 18:00 [ OFF ] 19:00 [ OFF ]20:00 [ OFF ] 21:00 [ OFF ] 22:00 [ OFF ] 23:00 [ OFF ]----- check system -----MAIN CPU BUS [ OK ]FAN [ OK ]INTAKE AIR TEMPERATURE [ OK ]OPTICS MODULE TEMPERATURE [ OK ]AROUND LAMP TEMPERATURE [ OK ]LAMP1 REMAIN TIME [ OK ]LAMP2 REMAIN TIME [ OK ]LAMP1 STATUS [ OK ]LAMP2 STATUS [ OK ]SHUTTER [ OK ]INTAKE AIR TEMP.SENSOR [ OK ]OPTICS MODULE TEMP.SENSOR [ OK ]AROUND LAMP TEMP.SENSOR [ OK ]BATTERY [ OK ]COLOR WHEEL [ OK ]COVER OPEN [ OK ]FILTER UNIT [ OK ]AIR FILTER [ OK ](Error code 00 00 00 00 00 00 00 00)Intake air temperature : 26 degC / 78 degFOptics module temperature : 39 degC / 102 degFAround lamp temperature : 30 degC / 86 degFPROJECTOR RUNTIME 1 HPOWER ON 1 timesLAMP1 ON 1 timesLAMP1 ECO 0 HLAMP1 NORMAL 0 HLAMP1 REMAIN 1999 HLAMP2 ON 1 timesLAMP2 ECO 0 HLAMP2 NORMAL 1 HLAMP2 REMAIN 1999 H-------- Current status ---------MAIN VERSION 1.00NETWORK VERSION 1.00SUB VERSION 1.00LAMP STATUS LAMP1=ON LAMP2=ONINPUT SIGNAL RGB1 ---0.00kHz / 0.00HzREMOTE2 STATUS DISABLE----- Wired Network configuration -----DHCP Client OFFIP address 192.168.10.100MAC address 70:58:12:00:00:00Wed Jan 18 11:42:37 2012----- Memo -----