Panasonic PT-DW740E Operating Instructions Manual

Also see for PT-DW640E: Operating instructions

Contents

Panasonic PT-DW740E Operating Instructions Manual Manual pdf 82 page image

82 - ENGLISHChapter 4 Settings — [PROJECTOR SETUP] menu[LAMP1 SERIAL NUMBER] Displays the serial number of the lamp 1.[LAMP2 SERIAL NUMBER] Displays the serial number of the lamp 2.[MAIN VERSION] Displays the main version of the firmware of the projector.[SUB VERSION] Displays the sub version of the firmware of the projector.[NETWORK VERSION] Displays the network version of the projector.[ON COUNT][POWER ON TIMES] Displays the number of times the power is turned on.[LAMP1 ON] Displays the number of times lamp 1 has been turned on.[LAMP2 ON] Displays the number of times lamp 2 has been turned on.[SHUTTER] Displays the number of times the shutter function has been used.[LAMP1] Displays the details of cumulative operating time.[LAMP2] Displays the details of cumulative operating time.[NUMBER OF ENTRY SIGNAL] Displays the number of registered signals.[REMOTE2 STATUS] Displays the control status of the REMOTE2.[SIGNAL INFORMATION][MEMORY NO.] Displays the memory number of the input signal.[INPUT] Displays the input terminal currently selected.[SIGNAL NAME] Displays the input signal name.[SIGNAL FREQUENCY] Displays the frequency of the input signal.[SYNC.STATE] Displays the synch polarity of the input signal.[V.SYNC WIDTH] Displays the vertical sync signal pulse width of the input signal.[SCAN TYPE] Displays the scan type of the input signal.[TOTAL DOTS] Displays the total dot count of the input signal.[DISPLAY DOTS] Displays the number of input signal display dots.[TOTAL LINES] Displays the total line count of the input signal.[DISPLAY LINES] Displays the number of input signal display lines.[SAMPLING] Displays the sampling information of the input signal.* Displays the actual time for the hours used of lamp.To calculate a rough guide for lamp replacement, convert as follows:Lamp replacement time =Cumulative operating time when [LAMP POWER] is set to [NORMAL] + (Cumulative operating time when [LAMP POWER] is set to [ECO] x2/3)Noterf The content of status can be sent via E-mail by pressing the button while displaying the status.rf Some items in [SIGNAL INFORMATION] may be displayed and others not displayed, depending on the signal being input.[NO SIGNAL SHUT-OFF]You can set the power of the projector automatically to standby if there is no input signal by the specified time.1) Press as to select [NO SIGNAL SHUT-OFF]. 2) Press qw to switch [NO SIGNAL SHUT-OFF].rr [NO SIGNAL SHUT-OFF][DISABLE] Disables the No signal shut-off function.[10MIN.] - [90MIN.] Allows you to set in ten minutes intervals.[FUNCTION BUTTON]Set the functions of the button on the remote control.1) Press as to select [FUNCTION BUTTON].2) Press the button.rf The [FUNCTION BUTTON] screen is displayed.3) Press as to select a function.4) Press the button.rr Available functions[DISABLE] Disables the button.[SUB MEMORY] Switches the sub memory. (x page 87)[SYSTEM SELECTOR] Switches the [SYSTEM SELECTOR] setting. (x page 59)