ENGLISH - 89Chapter 4 Settings — [SECURITY] menu[SECURITY] menuSelect [SECURITY] from the main menu, and select the item from the sub-menu.Refer to “Navigating through the menu” (x page 51) for the operation of the menu screen.rf When the projector is used for the first timeInitial password: Press awsqawsq in order, and press the button.rf After selecting the item, press asqw to set.Attentionrf When you select the [SECURITY] from the main menu and press the button, entering a password is required. Enter the setpassword and then continue operations of the [SECURITY] menu.rf When the password has been changed previously, enter the changed password, and press the button.Noterf The entered password is displayed with * mark on the screen.[SECURITY PASSWORD]The [SECURITY PASSWORD] screen is displayed when the power is turned on. When the entered password is incorrect, the operation will berestricted to the power standby <v> button, the button, and the (, , and ) buttons.1) Press as to select [SECURITY PASSWORD]. 2) Press qw to switch [SECURITY PASSWORD].rf The setting will change between [OFF] and [ON] each time youpress the button.rr [SECURITY PASSWORD][OFF] Disables the security password entry.[ON] Enables the security password entry.Noterf The [SECURITY PASSWORD] setting is set to [OFF] at the time of purchase or when all the user data has been initialized.rf Change the password periodically that is hard to guess.rf The security password will be enabled after setting [SECURITY PASSWORD] to [ON] and turning the switch to .[SECURITY PASSWORD CHANGE]Change the security password.1) Press as to select [SECURITY PASSWORDCHANGE].2) Press the button.rf The [SECURITY PASSWORD CHANGE] screen is displayed.3) Press asqw and the number (<0> to <9>)buttons to set the password.rf Up to eight button operations can be set.4) Press the button.5) Re-enter the password for the confirmation.6) Press the button.Noterf The entered password is displayed with * mark on the screen.rf An error message is displayed on the screen when the entered password is incorrect. Re-enter the correct password.[DISPLAY SETTING]Overlap the security message (text or image) over the projecting image.1) Press as to select [DISPLAY SETTING].
