Panasonic PT-DW740E Operating Instructions Manual

Also see for PT-DW640E: Operating instructions

Contents

Panasonic PT-DW740E Operating Instructions Manual Manual pdf 99 page image

ENGLISH - 99Chapter 4 Settings — [NETWORK] menurf The following setting change screen is displayed by pressing the [Change] button.(1)(2)(3)(4)(5)(6)(7)(8)1 [PROJECTOR NAME]Enter the name of the projector. Also enter the host name if it isrequired when using a DHCP server, etc.2 [DHCP ON]/[DHCP OFF]To enable the DHCP client function, set to [DHCP ON].3 [IP ADDRESS]Enter the IP address when not using a DHCP server.4 [SUBNET MASK]Enter the subnet mask when not using a DHCP server.5 [DEFAULT GATEWAY]Enter the default gateway address when not using a DHCPserver.6 [DNS1]Enter the DNS1 server address.Permissible characters for the entry of DNS1 server address(primary):Numbers (0 to 9), period (.)(Example: 192.168.0.253)7 [DNS2]Enter the DNS2 server address.Permissible characters for the entry of DNS2 server address(secondary):Numbers (0 to 9), period (.)(Example: 192.168.0.254)8 [Back]/[Next]Click the [Back] button to return to the original screen. Thecurrent settings are displayed by pressing the [Next] button.Click the [Submit] button to update the settings.Noterf When you use the “Forward” and “Back” functions of your browser, a warning message “Page has Expired” may appear. In that case, click[Network config] again since the following operation will not be guaranteed.[Adjust clock] pageClick [Detailed set up] → [Adjust clock].(1)(2)(3)(4)(5)(6)(7)1 [Time Zone]Select the time zone.2 [Set time zone]Updates the time zone setting.3 [NTP SYNCHRONIZATION]Set to [ON] to adjust the date and time automatically.4 [NTP SERVER NAME]Enter the IP address or server name of the NTP server whenyou set to adjust the date and time manually.(To enter the server name, the setup of the DNS server isrequired.)5 [Date]Enter the date to be changed.6 [Time]Enter the time to be changed.7 [Set date and time]Updates the date and time settings.