Panasonic PT-DW740E Operating Instructions Manual

Also see for PT-DW640E: Operating instructions

Contents

Panasonic PT-DW740E Operating Instructions Manual Manual pdf 62 page image

62 - ENGLISHChapter 4 Settings — [POSITION] menuNoterf When [ASPECT] is set to [THROUGH], [ZOOM] is not displayed.When [ASPECT] is set to [DEFAULT]1) Press as to select [ZOOM].2) Press the button.rf The [ZOOM] screen is displayed.3) Press as to select [MODE].4) Press qw to switch [MODE].5) Press as to select [INTERLOCKED].6) Press qw to switch [INTERLOCKED].7) Press as to select [VERTICAL] or[HORIZONTAL].rf Select [BOTH] when [ON] is selected.8) Press qw to adjust.rr [MODE][INTERNAL] Enlarges the size within the aspect range set with [SCREEN FORMAT].[FULL] Enlarges the size to the entire display area set with [SCREEN FORMAT].rr [INTERLOCKED][OFF] [VERTICAL] Set the [VERTICAL] and [HORIZONTAL] zoom ratio.[HORIZONTAL][ON] [BOTH] Use [BOTH] to set zoom ratio. Horizontal and vertical can be expandedby units of 1.0 time.Noterf When [ASPECT] is set to other than [DEFAULT], [MODE] is not displayed.[CLOCK PHASE]You can adjust to achieve an optimal image when there is a flickering image or smeared outlines.1) Press as to select [CLOCK PHASE].2) Press qw or the button.rf The [CLOCK PHASE] individual adjustment screen isdisplayed.3) Press qw to adjust.rf Adjustment value will change between 0 and +31. Adjust so thatthe amount of interference is at a minimum.Noterf Optimal value may not be achieved if the output from the input computer is unstable.rf Optimal value may not be achieved when there is a shift in the total dot numbers.rf [CLOCK PHASE] can be adjusted only when a signal is input to the terminal or the terminal.rf [CLOCK PHASE] cannot be adjusted when a digital signal is input.rf If you press w while the adjustment value is [+31], the value will become [0]. If you press q while the adjustment value is [0], the value willbecome [+31].