58 - ENGLISHChapter 4 Settings — [PICTURE] menu2) Press qw or the button.rf The [SYSTEM DAYLIGHT VIEW] individual adjustment screenis displayed.3) Press qw to switch [SYSTEM DAYLIGHTVIEW].rf The setting will change among [OFF], [1], [2] and [3] each timeyou press the button.rr [SYSTEM DAYLIGHT VIEW][OFF] No correction.[1] Corrects the image to weaken vividness.[2] Corrects the image to medium vividness.[3] Corrects the image to high vividness.[SHARPNESS]You can adjust the sharpness of the projected image.1) Press as to select [SHARPNESS]. 2) Press qw or the button.rf The [SHARPNESS] individual adjustment screen is displayed.3) Press qw to adjust the level.rr Operations and adjustment rangeOperation Adjustment RangePress w. Contours become sharper. 0 - +15Press q. Contours become softer.Noterf If you press w while the adjustment value is [+15], the value will become [0]. If you press q while the adjustment value is [0], the value willbecome [+15].[NOISE REDUCTION]You can reduce noises when the input image is degraded and noise is occurring in the image signal.1) Press as to select [NOISE REDUCTION].2) Press qw or the button.rf The [NOISE REDUCTION] individual adjustment screen isdisplayed.3) Press qw to switch [NOISE REDUCTION].rf The setting will change among [1], [2], [3] and [OFF] each timeyou press the button.rr [NOISE REDUCTION][1] Corrects the noise to low level.[2] Corrects the noise to medium level.[3] Corrects the noise to high level.[OFF] No correction.Attentionrf When this is set for an input signal with less noise, the image may look different from what it originally was. In such case, set it to [OFF].[AI]You can perform gradation control appropriate for an image to project it with optimal contrast.1) Press as to select [AI].2) Press qw or the button.rf The [AI] individual adjustment screen is displayed.3) Press qw to switch [AI].rf The setting will change between [ON] and [OFF] each time youpress the button.rr [AI][ON] Enables AI correction.[OFF] Disables AI correction.
