Panasonic PT-DZ770E Operating Instructions Manual

Contents

Connections32 - ENGLISHGetting StartedBefore connecting to the projectorz Before connecting, carefully read the operating instructions for the external device to be connected.z Turn off the power of all devices before connecting cables.z Acquire any connection cable necessary to connect the external device to the system that is either not suppliedwith the device or not available as an option.z Video signals containing too much jitter may cause the images on the screen to randomly wobble or wafture. Inthis case, a time base corrector (TBC) must be connected.z The projector accepts video signals, S video signals, analog RGB signals (synchronous signals are TTL level),and digital signals.z Some computer models are not compatible with the projector.z Use a cable compensator when you connect devices to the projector using long cables. Otherwise the imagemay not display properly.z Refer to “List of compatible signals” ( page 118) for the types of video signals that can be used with theprojector.▶■

terminal pin assignments and signal names

Outside view Pin No. Signal name(1) (2)(3) (4)(1) Ground (luminance signal)(2) Ground (color signal)(3) Luminance signal(4) Color signal▶■ terminal pin assignments and signal namesOutside view Pin No. Signal name(4) and (9) are not used.(5) - (8), (10), and (11) are GNDterminals.(10)(6)(11) (15)(1) (5)(1) R/P R(2) G/Y(3) B/PB(12) DDC data(13) SYNC/HD(14) VD(15) DDC clock▶■

terminal pin assignments and signal names

Outside view Pin No. Signal name Pin No. Signal name(17)(24)(16) (9)(1)(8)(1) T.M.D.S data 2– (13) ―(2) T.M.D.S data 2+ (14) +5 V(3) T.M.D.S data 2/4shield (15) GND(4) ― (16) Hot plug detection(5) ― (17) T.M.D.S data 0–(6) DDC clock (18) T.M.D.S data 0+(7) DDC data (19) T.M.D.S data 0/5shield(8) ― (20) ―(9) T.M.D.S data 1– (21) ―(10) T.M.D.S data 1+ (22) T.M.D.S clockshield(11) T.M.D.S data 1/3shield (23) T.M.D.S clock+(12) ― (24) T.M.D.S clock–Connections