Panasonic PT-DZ770E Operating Instructions Manual

Contents

Read this first!6 - ENGLISHImportantInformationWARNING: ACCESSORIESDo not use or handle the batteries improperly, and refer to the following.Failure to observe this will cause burns, batteries to leak, overheat, explode or catch fire.z Use AA/R6 batteries.z Do not use unspecified batteries.z Do not use chargeable batteries.z Do not disassemble dry cell batteries.z Do not heat the batteries or place them into water or fire.z Do not allow the + and – terminals of the batteries to come into contact with metallic objects such asnecklaces or hairpins.z Do not store batteries together with metallic objects.z Store the batteries in a plastic bag and keep them away from metallic objects.z Make sure the polarities (+ and –) are correct when inserting the batteries.z Do not use a new battery together with an old battery or mix different types of batteries.z Do not use batteries with the outer cover peeling away or removed.If the battery fluid leaks, do not touch it with bare hands, and take the following measures if necessary.z Battery fluid on your skin or clothing could result in skin inflammation or injury.Rinse with clean water and seek medical advice immediately.z Battery fluid coming in contact with your eyes could result in loss of sight.In this case, do not rub your eyes. Rinse with clean water and seek medical advice immediately.Do not disassemble the lamp unit.Doing so can cause electric shocks, burns, or injury.Lamp replacementThe lamp has high internal pressure. If improperly handled, an explosion and severe injury or accidents willresult.z The lamp can easily explode if struck against hard objects or dropped.z Before replacing the lamp, be sure to turn the power off and to disconnect the power plug from the walloutlet.Electric shocks or explosions can result if this is not done.z When replacing the lamp, turn the power off and allow it to cool for at least one hour before handling itotherwise it can cause burns.Do not use the supplied power cord with devices other than this projector.z Using the supplied power cord with devices other than this projector may cause short circuits oroverheating, and result in electric shock or fire.Remove the depleted batteries from the remote control promptly.z Leaving them in the unit may result in fluid leakage, overheating, or explosion of the batteries.CAUTION: POWERWhen disconnecting the power cord, be sure to hold the power plug and power connector.If the power cord itself is pulled, the lead will become damaged, and fire, short-circuits or serious electricshocks will result.When not using the projector for an extended period of time, disconnect the power plug from the walloutlet.Failure to do so may result in fire or electric shock.Disconnect the power plug from the wall outlet before carrying out any cleaning and replacing the unit.Failure to do so may result in electric shock.