[DISPLAY OPTION] menuENGLISH - 61 Settings[RGB IN]Set to match the signal to input to the terminal.1) Press ▲▼ to select [RGB IN].2) Press the button.▶z The [RGB IN] screen is displayed.3) Press ▲▼ to select an item.▶■ To switch the slice level of aninput sync signal4) Select [RGB1 SYNC SLICE LEVEL] or[RGB2 SYNC SLICE LEVEL] in Step 3).5) Press ◀▶ to switch the [RGB1 SYNCSLICE LEVEL] or the [RGB2 SYNCSLICE LEVEL].▶z The setting will change as follows each timeyou press the button.[LOW] [HIGH][LOW] Set the slice level to [LOW].[HIGH] Set the slice level to [HIGH].[DVI-D IN]Switch the setting when the external equipment isconnected to the terminal of the projectorand the image is not projected correctly.1) Press ▲▼ to select [DVI-D IN].2) Press the button.▶z The [DVI-D IN] screen is displayed.3) Press ▲▼ to select [DVI EDID].4) Press ◀▶ to switch [DVI EDID].▶z The setting will change as follows each timeyou press the button.[EDID3] [EDID1] [EDID2:PC][EDID3] Switch between fine settings for amoving image and for a still image.[EDID1]Select mainly when an externaldevice that outputs movie-typeimage signals (such as a blu-raydisk player) is connected to the terminal.[EDID2:PC]Select mainly when an externaldevice that outputs still image-type signals (such as a computer)is connected to the terminal.5) Press ▲▼ to select [DVI SIGNALLEVEL].6) Press ◀▶ to switch [DVI SIGNALLEVEL].▶z The setting will change as follows each timeyou press the button.[0-255:PC] [16-235][0-255:PC]Select when an external device(such as a computer) is connectedvia DVI-D terminal output.[16-235]Select when an external device(such as a blu-ray disc player)is connected via HDMI terminaloutput by use of a conversion cableor similar cable.Notez The optimal setting is different depending on theoutput setting of the connected external equipment.Refer to the instruction manual of the externalequipment regarding the output of the externalequipment.z The data for Plug and play will change when thesetting is changed. Refer to “List of compatiblesignals” ( page 118) for a resolution that supportsplug and play.
