[PICTURE] menuENGLISH - 49 Settings7) Press the button.▶z The [COLOR TEMPERATURE NAMECHANGE] screen is displayed.8) Press ▲▼◀▶ to select the text, andpress the button to enter thetext.9) Press ▲▼◀▶ to select [OK], andpress the button.▶z The name set to color temperature is changed.Notez When a name is changed, display of [USER] on themenu is also changed.[WHITE GAIN]You can adjust the brightness of white areas of theimage.1) Press ▲▼ to select [WHITE GAIN].2) Press ◀▶ or the button.▶z The [WHITE GAIN] individual adjustmentscreen is displayed.3) Press ◀▶ to adjust the level.Operation Adjustment RangePress ▶ . Increases theluminance of white.Maximumvalue +10Press ◀ . Image becomesnatural.Minimumvalue 0[SYSTEM DAYLIGHT VIEW]You can correct the image to the optimal vividnesseven if it is projected under a bright light.1) Press ▲▼ to select [SYSTEMDAYLIGHT VIEW].2) Press ◀▶ or the button.▶z The [SYSTEM DAYLIGHT VIEW] individualadjustment screen is displayed.3) Press ◀▶ to switch [SYSTEMDAYLIGHT VIEW].▶z The setting will change as follows each timeyou press the button.[OFF] (Nocorrection) [1] (Low)[3] (High) [2] (Medium)[SHARPNESS]You can adjust the sharpness of the projected image.1) Press ▲▼ to select [SHARPNESS].2) Press ◀▶ or the button.▶z The [SHARPNESS] individual adjustmentscreen is displayed.3) Press ◀▶ to adjust the level.Operation Adjustment RangePress ▶ . Contours becomesharper. 0 - 15Press ◀ . Contours becomesofter.Notez If you press ▶ while the adjustment value is [15],the value will become [0]. If you press ◀ while theadjustment value is [0], the value will become [15].[NOISE REDUCTION]You can reduce noises when the input image isdegraded and noise is occurring in the image signal.1) Press ▲▼ to select [NOISEREDUCTION].2) Press ◀▶ or the button.▶z The [NOISE REDUCTION] individualadjustment screen is displayed.3) Press ◀▶ to switch [NOISEREDUCTION].▶z The setting will change as follows each timeyou press the button.[1] (Low) [2] (Medium)[OFF] (Nocorrection) [3] (High)Attentionz When this is set for an input signal with less noise,the image may look different from what it originallywas. In such case, set it to [OFF].
