[PICTURE] menuENGLISH - 47 Settings[PICTURE] menuSelect [PICTURE] from the main menu, andselect the item from the sub-menu.Refer to “Navigating through the menu”( page 44) for the operation of the menuscreen.z After selecting the item, press ▲▼◀▶ to set.[PICTURE MODE]You can switch to the desired picture mode suitablefor the image source and the environment in whichthe projector is used.1) Press ▲▼ to select [PICTURE MODE].2) Press ◀▶ or the button.▶z The [PICTURE MODE] individual adjustmentscreen is displayed.3) Press ◀▶ to switch [PICTURE MODE].▶z The setting will change as follows each timeyou press the button.[STANDARD] [CINEMA] [NATURAL][GRAPHIC] [REC709][DYNAMIC] [DICOMSIM.][STANDARD] The picture becomes suitable formoving images in general.[CINEMA] The picture becomes suitable formovie sources.[NATURAL] The picture is sRGB compliant.[REC709] *1 The picture is REC709 compliant.[DICOMSIM.] *1The picture becomes similar tothat of DICOM Part14 GrayscaleStandard.[DYNAMIC] The light output is maximized foruse in bright areas.[GRAPHIC] The picture becomes suitable forinput from to the personal computer.*1: Use the factory default for the settings other than [PICTUREMODE].Notez The factory default picture mode is [GRAPHIC] forstill image input signals and [STANDARD] for moviebased input signals.z DICOM is an abbreviation for “Digital Imaging andCommunication in Medicine” and is a standard formedical imaging devices. Although the DICOMname is used, the projector is not a medical device,and should not be used for purposes such asdiagnosis of display images.[CONTRAST]You can adjust the contrast of the colors.1) Press ▲▼ to select [CONTRAST].2) Press ◀▶ or the button.▶z The [CONTRAST] individual adjustment screenis displayed.3) Press ◀▶ to adjust the level.Operation Adjustment RangePress ▶ .Brightens thescreen and makesthe color of imagedeeper.Maximumvalue +31Press ◀ .Darkens the screenand makes thecolor of imagelighter.Minimumvalue –31Attentionz Adjust [BRIGHTNESS] first when you need toadjust the black level.[BRIGHTNESS]You can adjust the dark (black) part of the projectedimage.1) Press ▲▼ to select [BRIGHTNESS].2) Press ◀▶ or the button.▶z The [BRIGHTNESS] individual adjustmentscreen is displayed.3) Press ◀▶ to adjust the level.Operation Adjustment RangePress ▶ .Increases thebrightness of thedark (black) parts ofthe screen.Maximumvalue +31Press ◀ .Reduces thebrightness of thedark (black) parts ofthe screen.Minimumvalue –31
