Chapter 4 Settings — [SECURITY] menuENGLISH - 107[DISPLAY SETTING]Overlap the security message (text or image) over the projecting image.1) Press as to select [DISPLAY SETTING].2) Press qw to switch the item.f The items will switch each time you press the button.[OFF] The text display is disabled.[TEXT] The text display is enabled.[USER LOGO] Displays the image registered by the user.Notef To create/register the [USER LOGO] image, use “Logo Transfer Software” included in the supplied CD-ROM.[TEXT CHANGE]Change the text displayed when the text display is enabled by selecting [TEXT] in [DISPLAY SETTING].1) Press as to select [TEXT CHANGE].2) Press the button.f The [TEXT CHANGE] screen is displayed.3) Press asqw to select the text, and press the button to enter the text.4) Press asqw to select [OK], and press the button.f The text is changed.[MENU LOCK]Display the menu by the 1) Press as to select [MENU LOCK].2) Press qw to switch the item.f The items will switch each time you press the button.[OFF] Unlocks menu operations.[ON] Locks menu operations.Notef When the entered password is incorrect after setting [MENU LOCK] to [ON], the f [MENU LOCK] is set to [OFF] at the time of purchase or when [ALL USER DATA] in [INITIALIZE] (x page 98) is executed.f The unlock state is held until the projector enters the standby mode.[MENU LOCK PASSWORD]The menu lock password can be changed.1) Press as to select [MENU LOCK PASSWORD].2) Press the button.f The [MENU LOCK PASSWORD] screen is displayed.3) Press asqw to select the text, and press the button to enter the text.4) Press asqw to select [OK], and press the button.f To cancel, select [CANCEL].Attentionf The initial password is “AAAA” by the factory default or when [ALL USER DATA] in [INITIALIZE] (x page 98) is executed.f Change the password periodically that is hard to guess.
