Panasonic PT-EZ770Z Operating Instructions Manual

Also see for PT-EW730Z: Information for users Service manual Operating instructions Operating instructions

Contents

Panasonic PT-EZ770Z Operating Instructions Manual Manual pdf 113 page image

Chapter 4 Settings — [NETWORK] menuENGLISH - 113f For the LAN cable between a twisted-pair-cable transmitter and the projector, use a cable that meets the following criteria:g Compatible with CAT5e or higherg Shielded type (including connectors)g Straight-throughg Single wiref The maximum transmission distance between the twisted-pair-cable transmitter and the projector is 100 m (328'1"). If this distance isexceeded, image and sound may be disrupted and may cause a malfunction in LAN communication.f When laying cables between a twisted-pair-cable transmitter and the projector, check that cable characteristics are compatible with CAT5eor higher using tools such as a cable tester or cable analyzer.When using a relay connector midway, include it in the measurement.f Do not use a hub between a twisted-pair-cable transmitter and the projector.f Do not pull cables forcefully. Also, do not bend or fold cables unnecessarily.f To reduce the effects of noise as much as possible, stretch out the cables between the twisted-pair-cable transmitter and the projectorwithout any loops.f Lay the cables between a twisted-pair-cable transmitter and the projector away from other cables, particularly power cables.f When installing multiple cables, run them side by side along the shortest distance possible without bundling them together.f After laying the cables, confirm that the value of [SIGNAL QUALITY] in the [NETWORK] menu → [DIGITAL LINK STATUS] is displayed ingreen (indicates normal quality). (x page 110)f For twisted-pair-cable transmitter of other manufacturers of which the operation has been verified with the DIGITAL LINK compatibleprojector, refer to Panasonic website (http://panasonic.net/avc/projector/). Note that the verification for devices of other manufacturershas been made for the items set by Panasonic Corporation, and not all the operations have been verified. For operation or performanceproblems caused by the devices of other manufacturers, contact the respective manufacturers.Accessing from the web browser1) Start up the web browser on the computer.2) Enter the IP address set on the projector into the URL entry field of the web browser.3) Enter the user name and the password.f The factory default setting of the user name is user1 (user rights)/admin1 (administrator rights) and the password is panasonic (lowercase).4) Click OK.f The [Projector status] page is displayed.Notef If you use a web browser to control the projector, set [WEB CONTROL] to [ON] in [NETWORK CONTROL] (x page 111).