Panasonic PT-EZ770Z Operating Instructions Manual

Also see for PT-EW730Z: Information for users Service manual Operating instructions Operating instructions

Contents

Panasonic PT-EZ770Z Operating Instructions Manual Manual pdf 27 page image

Chapter 1 Preparation — About your projectorENGLISH - 27f Avoid contact with liquids or moisture.f Do not attempt to modify or disassemble the remote control.Notef When operating the remote control by directly pointing the remote control signal receiver of the projector, operate the remote control ata distance approx. 30 m (98'5") or shorter from the remote control signal receiver. The remote control can control at angles of up to ±30°vertically and horizontally, but the effective control range may be reduced.f If there are any obstacles between the remote control and the remote control signal receiver, the remote control may not operate properly.f The signal will be reflected off the screen. However, the operating range may be limited from light reflection loss due to the screen material.f If the remote control signal receiver directly receives strong light, such as fluorescent light, the remote control may not operate properly. Useit in a place distant from the light source.f The power indicator will flash if the projector receives a remote control signal.Projector body1 2 3 4 56 7 8 69 11 1512 14131517 91610Front SideRearProjection directionWARNINGKeep your hands and other objects away from the airexhaust port.f Keep your hands and face away.f Do not insert your fingers.f Keep heat-sensitive objects away.Heated air from the air exhaust port can cause burns, injury, ordeformations.1 Remote control signal receiver (front)2 Power indicator Displays the status of the power.3 Lamp indicator You can display the status of the lamp.4 Temperature indicator Displays the status of the internal temperature.5 Filter indicator Displays the status of the air filter unit.6 Adjustable feetAdjusts the projection angle.7 Speaker8 Projection Lens(Only models with lens)9 Air exhaust port10 Remote control signal receiver (rear)11

switchTurns off/on the main power.12 terminalConnect the supplied power cord.13 Connecting terminals (x page 29)14 Security slotThis security slot is compatible with the Kensington securitycables.15 Air intake port16 Air filter coverThe air filter unit is inside.17 Control panel (x page 28)