Chapter 4 Settings — [PICTURE] menu68 - ENGLISH3) Press qw to switch the item.f The items will switch each time you press the button.[OFF] No correction.[ON] Automatically corrects the aperture.[DAYLIGHT VIEW]You can correct the image to the optimal vividness even if it is projected under a bright light.1) Press as to select [DAYLIGHT VIEW].2) Press qw or the button.f The [DAYLIGHT VIEW] individual adjustment screen is displayed.3) Press qw to switch the item.f The items will switch each time you press the button.[AUTO] The brightness of the room is detected by the luminance sensor, and the vividness of the image isautomatically corrected.[OFF] No correction.[1] Corrects the image to weaken vividness.[2] Corrects the image to medium vividness.[3] Corrects the image to high vividness.Notef When [PROJECTION METHOD] (x page 88) is set to [REAR/FLOOR] or [REAR/CEILING], [AUTO] cannot be selected.f When objects, etc. are placed on the top of the projector, the [AUTO] mode may not function properly.[SYSTEM SELECTOR]The projector will automatically detect the input signal, but you can set the system method manually when an unstable signal is input. Set thesystem method matching the input signal.1) Press as to select [SYSTEM SELECTOR].2) Press the button.3) Press as to select a system format.f Available system formats vary depending on the input signal.Terminal System format
