Chapter 4 Settings — [PROJECTOR SETUP] menu98 - ENGLISH2) Press the button.f The [DATE AND TIME] screen is displayed.3) Press as to select [ADJUST CLOCK].4) Press the button.f The [ADJUST CLOCK] screen is displayed.5) Press as to select [NTP SYNCHRONIZATION], and press qw to change the setting to [ON].6) Press as to select [APPLY], and press the button.f The setting of the date and time will be completed.Notef To set the date and time automatically, the projector must be connected to the network.f If synchronization with the NTP server fails just after [NTP SYNCHRONIZATION] is turned [ON], or if [NTP SYNCHRONIZATION] is turned[ON] while the NTP server is not set, [NTP SYNCHRONIZATION] will return to [OFF].f Access the projector via a web browser to set the NTP server. Refer to “[Adjust clock] page” (x page 119) for details.[SAVE ALL USER DATA]Save the various setting values as a backup in the built-in memory of the projector.1) Press as to select [SAVE ALL USER DATA].2) Press the button.f The [SECURITY PASSWORD] screen is displayed.3) Enter a security password and press the button.4) When the confirmation screen is displayed, press qw to select [OK], and press the button.f [PROGRESS] is displayed while saving data.Notef Data set from the computer application is not included in [ALL USER DATA].[LOAD ALL USER DATA]Load the various setting values saved as a backup in the built-in memory of the projector.1) Press as to select [LOAD ALL USER DATA].2) Press the button.f The [SECURITY PASSWORD] screen is displayed.3) Enter a security password and press the button.4) When the confirmation screen is displayed, press qw to select [OK], and press the button.Notef The projector will go into the standby mode to reflect the setting values when [LOAD ALL USER DATA] is executed.f Data registered from a computer is not included in [ALL USER DATA].[INITIALIZE]Return various setting values to their factory default settings.1) Press as to select [INITIALIZE].2) Press the button.f The [SECURITY PASSWORD] screen is displayed.3) Enter a security password and press the button.f The [INITIALIZE] screen is displayed.4) Press as to select an item to initialize.[ALL USER DATA]Returns all setting items including [REGISTERED SIGNAL], [NETWORK SETUP], [E-mail set up],and [USER LOGO] to the factory default settings.The projector will go into the standby status to reflect the setting values.
