Panasonic PT-EZ770Z Operating Instructions Manual

Also see for PT-EW730Z: Information for users Service manual Operating instructions Operating instructions

Contents

Panasonic PT-EZ770Z Operating Instructions Manual Manual pdf 26 page image

Chapter 1 Preparation — About your projector26 - ENGLISHAbout your projectorRemote control13245876 691016171819151113202221242312142526Front TopBottom1 Power standby <v> buttonSets the projector to the state where the projector is switchedoff (standby mode) when the

switch on theprojector is set to and in the projection mode.2 Power on <b> buttonStarts projection when the

switch on theprojector is set to when the power is switched off(standby mode).3 Remote control indicatorFlashes if any button in the remote control is pressed.4 Lens (, , ) buttonsAdjusts the Projection Lens. (x page 51)5 button/ button/asqw buttonUsed to navigate through the menu screen. (x page 59)6 -> button/ buttonAdjusts the volume of the built-in speaker or audio output.(x page 54)7 buttonSwitches on (display)/off (hide) the on-screen display function.(x page 54)8 Input selection (, , ,

Switches the input signal to project. (x page 53)9 Number (<0> - <9>) buttonsUsed when the system uses multiple projectors.Used to input ID numbers or passwords.10 buttonUsed to simultaneously control all the projectors with a singleremote control when using multiple projectors. (x page 30)11 buttonDisplays the setting screen relating to ECO management.(x pages 57, 89)12 buttonUsed when temporarily turning off the image and audio.(x page 53)13 buttonAutomatically adjusts the image display position while theimage is projected.[PROGRESS] is displayed on the screen while adjustingautomatically. (x page 55)14 buttonSets the ID number of the remote control to use for a systemusing multiple projectors. (x page 30)15 buttonDisplays the [KEYSTONE] menu. (x pages 55, 72)16 buttonAssigns a frequently used operation as a shortcut button.(x page 57)17 buttonUsed when pausing the image and turning off the audio.(x page 54)18

button

Operates the presentation timer function. (x page 55)19 buttonDisplays the status of the projector. (x pages 57, 96)20 buttonResets the content of the sub-menu to the factory default.(x page 60)21 buttonDisplays the [DIGITAL ZOOM] menu. (x pages 56, 86)22 buttonUsed when temporarily turning off the audio. (x page 54)23 buttonSwitches the aspect ratio of the image. (x page 56)24

buttonSwitches the [P IN P] setting. (x page 56)25 Remote control signal transmitter26 Remote control wired terminalThis is the terminal to connect to the projector by a cable whenused as a wired remote control. (x page 31)Attentionf Do not drop the remote control.