|
Chapter 4 Settings — [DISPLAY OPTION] menu78 - ENGLISH[OFF] Standard setting[USER]For each of the following four signal formats: VIDEO, Y/C, RGB, and YPBPR/YCBCR, six colors of red,green, blue, cyan, magenta, and yellow can be adjusted and registered. Press the buttonto set the details. Adjustment is possible within the range of -31 - +31.[SCREEN SETTING]Set the screen size.Correct to the optimum image position for the set screen when changing the aspect ratio of a projected image. Set as necessary for the screenin use.1) Press as to select [SCREEN SETTING].2) Press the button.f The [SCREEN SETTING] screen is displayed.3) Press qw to switch the [SCREEN FORMAT] item.f The items will switch each time you press the button.Model No. [SCREEN FORMAT] Range when [SCREEN POSITION] is selectedPT-EZ770Z[16:10] Cannot be adjusted.[4:3] Adjusts the horizontal position between -160 and 160.[16:9] Adjusts the vertical position between -60 and 60.PT-EW730Z [16:10] Cannot be adjusted.[16:9] Adjusts the vertical position between -40 and 40.PT-EX800Z [4:3] Cannot be adjusted.[16:9] Adjusts the vertical position between -96 and 96.4) Press as to select [SCREEN POSITION].f If [SCREEN FORMAT] is set to [16:10] on PT-EZ770Z, PT-EW730Z, or [SCREEN FORMAT] is set to [4:3] on PT-EX800Z, thenselection and adjustment of [SCREEN POSITION] are not available.5) Press qw to adjust [SCREEN POSITION].[AUTO SIGNAL]Set whether to execute automatic setup of signals automatically.The screen display position or signal level can be adjusted automatically without pressing the button on the remote controlon each occasion if you input unregistered signals frequently at meetings, etc.1) Press as to select [AUTO SIGNAL].2) Press qw to switch the item.f The items will switch each time you press the button.[OFF] Sets the auto signal function to off.[ON] Executes automatic setup automatically when images are changed to unregistered signals duringprojection.[AUTO SETUP]Set this when adjusting a special signal or horizontally long (such as 16:9) signal.Setting with [MODE]1) Press as to select [AUTO SETUP].2) Press the button.f The [AUTO SETUP] screen is displayed.3) Press as to select [MODE].4) Press qw to switch the item.f The items will switch each time you press the button.[DEFAULT] Standard setting.
|
