Panasonic PT-LW362 Operating Instructions Manual

Also see for PT-LB332: Operating instructions (functional manual)

Contents

Panasonic PT-LW362 Operating Instructions Manual Manual pdf 38 page image

38 - ENGLISHProjectingCheck the connections of the peripheral devices (Æ page 31) and connection of the power cord (x page 35) and switchon the power (x page 36) to start the projector. Select the image and adjust the state of the image.Selecting the input signalSelect an input signal.1) Press the button on the control panel or the input selection (, ,,

f The image of the signal being input in the selected terminal is projected.Attentionf Images may not be projected properly depending on the connected device and DVD, video tape, etc. to be played. Select asystem format that is suitable for the input signal in [Display] menu → [System] (x page 52).f Check the aspect ratio of the screen and the image and select the optimum aspect ratio under the [Display] menu →[Aspect] (x page 51).How to adjust the state of the imageIf the projected image or the position is not correct when the positioning of the projector and the screen is correctly installed,adjust the focus and zoom.1) Adjust the projection angle.f Install the projector on a flat surface and parallel to the screen so that the projected screen is rectangular.f If the screen is tilted downward, extend the adjustable foot and adjust the projection screen so that the projected screenis rectangular.f For details, see “Adjusting adjustable foot” (x page 30) .2) Adjust the zoom and the focus.f Rotate the zoom ring to zoom in and out the image.f Rotate the focus ring to adjust the focus of the projected image.Zoom ringFocus ringNotef It is recommended that the images are projected continuously for at least 30 minutes before the focus is adjusted.f If you adjust the focus, you may need to adjust the size of the image by rotating the zoom ring again.f If keystone distortion occurs, see the [Expand] menu → [Keystone] (x page 62).Chapter 3 Basic Operations - Projecting