Panasonic PT-LW362 Operating Instructions Manual

Also see for PT-LB332: Operating instructions (functional manual)

Contents

Panasonic PT-LW362 Operating Instructions Manual Manual pdf 81 page image

ENGLISH - 81Network connectionThis projector has network function that allows the following by connecting a computer. The wireless module (Model No.: ET-WML100) of the optional accessories is required if the wireless LAN is connected.f WEB controlBy accessing to the projector from a computer, you can perform setting, adjustment, status display, etc. of the projector.Refer to “Web control function” (x page 86) for details.f Multi Projector Monitoring & Control softwareThis software allows you to monitor and control multiple projectors connected to the LAN. For details about “Multi ProjectorMonitoring & Control software”, please refer to the Operating Instructions which is included in the CD-ROM of accessories.f Presenter LightBy using still image transfer application software “Presenter Light” that supports Windows computers, you can transferimages and audio to the projector via the wired LAN/wireless LAN. For more details, please refer to the OperatingInstructions which is included in the CD-ROM of accessories.f VueMagicBy using still image transfer application software “VueMagic”, you can transfer images to the projector when iPad /iPhone / iPod touch or Android terminals are connected to this projector through the wireless LAN. Refer to “VueMagic”(x page 85) for details.f PJLinkBy using PJLink protocol, you can send inquiries about the operations or status of the projector from a computer. Refer to“Using the PJLink protocol” (x page 102) for details.When connecting via wired LANConnection exampleLAN cable (straight) LAN cable (straight)HubComputerProjectorr Name and function of terminal 1 2 31 LAN LINK/ACT lamp (yellow)Lights on when connected.Blinks when transmitting/receiving data.2 terminal (10BASE-T/100BASE-TX)Used to connect LAN cable here.3 LAN 10/100 lamp (green)Lights on when connected to the 100BASE-TX.Attentionf When a LAN cable is directly connected to the projector, the network connection must be made indoors.f When connecting cables to both the terminal and the terminal, it may be difficult to removethe LAN cable which is connected to the terminal. When removing the LAN cable from the terminal, remove acable connected to the terminal or the terminal beforehand.Notef A LAN cable is required to use the wired LAN function.f Use shielded LAN cable (STP cable) that is compatible with category 5 or above.f Use a LAN cable with length of 100 m or shorter.Chapter 5 Operation of Function - Network connection