52 - ENGLISH[Project way]Set the projection method in accordance with the installation status of the projector.Change the projection method if the screen display is upside down or inverted.1) Press as to select [Project way].2) Press the button.3) Press as to switch the item.f The items will switch each time you press the button.[Front] When installing the projector on the desk, etc. in front of the screen.[Rear] When installing the projector on the desk, etc. behind the screen (with a translucent screen).[Ceiling/Front] When installing the projector in front of the screen by using the Ceiling Mount Bracket forProjectors (optional).[Ceiling/Rear] When installing the projector behind the screen (with a translucent screen) by using the CeilingMount Bracket for Projectors (optional).[Menu position]Set the position of the menu screen (OSD).1) Press as to select [Menu position].2) Press the button.3) Press as to change the menu position.f The items will switch each time you press the button.[Upper left] → [Upper right] → [Center] → [Lower left] →[Lower right] → [Upper left] →...[Background display]Select the background screen when no input signal is detected.1) Press as to select [Background display].2) Press the button.3) Press as to switch the item.f The items will switch each time you press the button.[Blue] Displays the entire projection area in blue.[Black] Displays the entire projection area in black.[System]Set it to match the resolution of the computer input signals. Set the color system of Video/S-video signals.1) Press as to select [System].2) Press the button.f The [System] screen is displayed.3) Press as to select the desired system.f The items will switch each time you press the button.Input source Mode Descriptionfor RGB signal[1024 x 768, 60Hz], etc Displays the name of the correspond signal.[Auto]When there is no input signal compatible with the signal from a connectedcomputer on the projector, the Auto PC adj. function works and [Auto]is displayed on the system. If images are not being correctly projected,manually adjust the settings to suit your computer.for Video/S-videosignal[Auto] The projector automatically selects the color system of the input signal.Sets [PAL-M] manually.[PAL] / [SECAM] /[NTSC] / [NTSC443] /[PAL-M] / [PAL-N] /[PAL60]Sets the color system manually when the image is not displayed correctlyin [Auto].4) Press the button.Chapter 4 Settings - [Display] menu
