70 - ENGLISH[Network setting]1) Press as to select [Network].2) Press the button.f The [Network] screen is displayed.3) Press the button.f The [Network setting] screen is displayed.4) Press as to select an item, and change the setting according to the instructions.[DHCP][On]: If a DHCP server exists in the network to which the projector is connected,the IP address will automatically be acquired.[Off]: If a DHCP server does not exist in the network to which the projector isconnected, additionally set [IP address], [Subnet] and [Gateway].[IP address] Enter the IP address if DHCP server is not used.[Subnet] Enter the subnet mask if DHCP server is not used.[Gateway] Enter the gateway address if DHCP server is not used.[DNS] Enter the DNS server address if DHCP server is not used.5) Press as to select [Set], and press the button.f The following settings are set before the projector leaves the factory.[DHCP] Off[IP address] 192.168.1.100[Subnet] 255.255.255.0[Gateway] 192.168.1.1[DNS] 192.168.1.1Notef Before using the DHCP server, make sure the DHCP server is already functioning.f Consult your network administrator regarding the IP address, Subnet and Gateway.[Network information]1) Press as to select [Network].2) Press the button.f The [Network] screen is displayed and then confirm the following items.[MAC address] Displays the MAC address of this projector.[IP address] Displays the current IP address of this projector.[SSID] *1 Displays the SSID character string of the projector while the Wireless LAN is connected.[Wireless IP] *1 Displays the IP address of the wireless module which is inserted into the projector while thewireless LAN is connected.*1 It will be displayed when the wireless module (Model No.: ET-WML100) of the optional accessories is inserted.[Remote control]This switching function prevents remote control interference when operating several projectors or video equipment at the sametime.1) Press as to select [Remote control].2) Press the button.f The [Remote control] screen is displayed.3) Press as to select one item.f This projector provides seven different remote control codes: [ALL], [Code 1]~[Code 6].[ALL] Select when controlling projectors without specifying an ID number.[Code 1] - [Code 6] Select when specifying an ID number to control individual projector.Chapter 4 Settings - [Expand] menu
