62 - ENGLISH[Keystone]You can correct the trapezoidal distortion that occurs when the projector is installed tilted or when the screen is tilted.1) Press as to select [Keystone].2) Press the button.f The [Keystone] screen is displayed.3) Press as to select one item.[Keystone] Sets whether or not to keep the keystone correction after turn off the projector or plug outthe power cord.[H/V Keystone] Adjusts when the horizontal or vertical trapezoid of the projected image is distorted.[Corner correction] Adjusts when the four corners of the projected image are distorted.[Curved correction] Adjusts when the linearity is not uniform or the vertical and horizontal lines are distorted.[Reset value] Return the corrected values to the factory default values.[Keystone]Sets whether or not to keep the keystone correction after turn off the projector or plug out the power cord.1) Press as to select [Keystone].2) Press the button.f The [Keystone] screen is displayed.3) Press as to select [Keystone].4) Press the button.5) Press as to switch the item.f The items will switch each time you press the button.[Reset]When [Standby mode] is set to [Eco], plug out the power cord or turn off the projector, thekeystone correction will be canceled. When [Standby mode] is set to [Normal], plug out the powercord, the keystone correction will be canceled; turn off the projector, the keystone correction willbe kept.[Store] The keystone correction will be kept when plug out the power cord or turn off the projector.[H/V Keystone]1) Press as to select [Keystone].2) Press the button.f The [Keystone] screen is displayed.3) Press as to select [H/V Keystone].4) Press the button.f The [H/V Keystone] individual adjustment screen is displayed.5) Press asqw to adjust the item.Items Operation AdjustmentHorizontalPress the w button. Adjusts the right of the keystone.Press the q button. Adjusts the left of the keystone.Chapter 4 Settings - [Expand] menu
