Panasonic PT-LW362 Operating Instructions Manual

Also see for PT-LB332: Operating instructions (functional manual)

Contents

Panasonic PT-LW362 Operating Instructions Manual Manual pdf 76 page image

76 - ENGLISHAbout Memory Viewer functionThe Memory Viewer function makes it is possible to project the video or still image stored in the USB memory.What you can project with the Memory Viewer functionMemory Viewer function supports the following image files.VideoExtension Video codec Audio codec Video formatavi MotionJpeg ADPCM YUV 4:4:4, YUV 4:2:2, YUV 4:2:0Maximum : 1 280 x 720, 30 fpsPictureExtension Format Descriptionjpg/jpeg Baseline coding 24 bitsProgressive RGB 24 bitsResolution : 8 x 8 ~ 10 000 x 10 000Resolution : 8 x 8 ~ 1 280 x 800bmp Palette-based 1, 4, 8 bits,RGB 24, 32 bits The maximum resolution : 1 280 x 800png True color 24 bits/48 bits The maximum resolution : 1 280 x 800gif Palette-based 1, 4, 8 bits, Palette - 24 bits color spaces;The maximum resolution : 1 280 x 800tif / tiff The maximum resolution : 1 280 x 800pdfNotef The maximum size of file is 2 GB.f The total number of folders/files that can be displayed is about 500 at the maximum. In addition, other than the supportedformat as the above table cannot be displayed.f You cannot play the files which is protected by Digital Rights Management (DRM).f You cannot play the PDF files which are protected by security setting.f It maybe impossible to resume playing even if the file is recorded in the supported format.Cautions on using USB MemoryPlease observe the following.f Do not put USB memory or its cap within close reach of children. Swallowing them may cause suffocation.f If the smoke or questionable odor rise, remove the USB memory from the projector, and then contact your dealer.f Do not put water, chemical or oil to the USB memory. It may cause short out or fire.f Do not put foreign objects or put metal objects to the USB terminal. Static electricity may cause data loss or data corruption.f Do not remove the USB memory from the computer or the projector while the USB memory is reading out or writing the data.It may cause data loss or data corruption.f Do not store the USB memory where high temperature, humid or dusty place or magnetized items are around.Notef It is compatible with the USB memory sold in the market.f It cannot be used the other format other than the formatted with FAT16 and FAT32.Inserting the USB memory1) Insert the USB memory directly into the terminal.Attentionf When inserting the USB memory, confirm the direction of the plug and do not damage the terminal.Removing the USB memory1) Make sure that the USB memory is not flashing, and then unplug it.Attentionf Please note following points when removing the USB memory.- The indicator of the USB memory is blinking means that the projector is reading out the data. Do not remove the USBmemory while it is blinking.- When using a USB memory without an indicator, you cannot recognize when the projector reading out the data. Pleaseremove it from the projector after closing the memory viewer function or turning off the projector.- Do not insert and remove the USB memory in a short time. Remove the USB memory at least five seconds after inserting.And insert it at least five seconds after removing. When inserting or removing the USB memory, the projector takes aboutfive seconds to identify the operation.Chapter 5 Operation of Function - About Memory Viewer function