Panasonic PT-LW362 Operating Instructions Manual

Also see for PT-LB332: Operating instructions (functional manual)

Contents

Panasonic PT-LW362 Operating Instructions Manual Manual pdf 82 page image

82 - ENGLISHProjector settings1) Use the LAN cable (Straight) to connect the projector with computer.2) Turn on the projector.3) Set the [Expand] menu → [Network] → [Network setting].f For details, refer to the [Expand] menu → [Network] (x page 69).Notef Please confirm with your network administrator before you connect to an existing network.f The following settings are set before the projector leaves the factory.[DHCP] Off[IP address] 192.168.1.100[Subnet] 255.255.255.0[Gateway] 192.168.1.1[DNS] 192.168.1.1Computer settingConnection can be made with wired LAN. However, confirm to your system administrator on network settings before chang-ing any settings.1) Turn on the computer.2) Make the network setting according to your system administrator.f If the projector settings are the default settings, the computer can be used with the following network settings.[IP address] 192.168.1.101[Subnet] 255.255.255.0[Gateway] 192.168.1.1When connecting via wireless LANThe wireless module (Model No.: ET-WML100) of the optional accessories is required if you want to use the network functionthrough the wireless LAN.f Only one projector can be connected with the wireless LAN.Connection exampleIEEE802.11b/g/nWireless module of optional accessories(Model No.: ET-WML100)Preparation and confirmation of the projector1) Turn on the projector.2) Insert the wireless module (Model No.: ET-WML100) of optional accessories firmly into the (VIEWER/WIRELESS)> terminal.LEDWireless module of optional accessories(Model No.: ET-WML100)Chapter 5 Operation of Function - Network connection