|
40 - ENGLISHSwitching the aspect ratio of the imageYou can switch aspect ratios according to the input signal.button1) Press the button on the remote control.Notef For more details, refer to the [Display] menu → [Aspect] (x page 51).Using the keystone distortion and curved correction functionsYou can correct the trapezoidal distortion and the curved distortion of the projected image.button1) Press the button on the remote control.f The selection screen of keystone function is displayed.f You can also press the button on the control panel.[H/V Keystone] Select when the trapezoid of the projected image is distorted.[Corner correction] Select when the four corners of the projected image are distorted.[Curved correction] Select when the linearity is not uniform or the projected image is curved distortion.[Reset value] Return the corrected values to the factory default values.2) Press as to select [H/V Keystone], [Corner correction], [Curved correction] or [Reset value].3) Press the button.f The individual adjustment screen of the selected function is displayed.4) Press asqw to adjust.Notef For more details, refer to the [Expand] menu → [Keystone] (x page 62).f Press the button on the control panel or on the remote control when the [H/V Keystone], [Corner correction]or [Curved correction] individual adjustment screen is displaying, the individual adjustment screen will switch as follows.- [H/V Keystone] [Corner correction] (Upper left) [Corner correction] (Upper right) [Corner correction] (Lower right) [Corner correction] (Lower left) [Curved correction X/Y Gain] [Curved correction X Offset] [Curved correction YOffset] [H/V Keystone] ...Using the information functionThis function allows you to display the status of the projector.button1) Press the button on the remote control.f The [Info.] screen is displayed.f When the [Info.] screen is recalled by using button on the remote control, the on-screen menu cannot beoperated.2) Press the button again.f The [Info.] screen disappears.Notef For more details, refer to the [Info.] menu (x page 74).Chapter 3 Basic Operations - Basic operations by using the remote control
|
