Panasonic PT-VX42Z Operating Instructions Manual

Also see for PT-VX42Z: Operating instructions (functional manual)Manual 

Contents

Panasonic PT-VX42Z Operating Instructions Manual Manual pdf 22 page image

Zoom ring (Back)1Adjust the zoom.Control Panel and Indicators (2 Æpage 23)Lamp cover (3 Æpage 97)The lamp unit is located inside.Projection Lens4Focus ring (Front)5Adjust the focus.Remote control signal receiver6Air exhaust port7Speaker8 terminal9Connect the supplied power cord.Rear terminals (10 Æpage 23)Air intake port / Air filter cover (11 Æpage 95)The air filter unit is inside.Adjustable feet12Adjust the projection angle.Security Chain Hook13Attaches a burglar prevention cable, etc.NoteThe remote control can be used within a distance of about 7 m (22.97') if pointed directly at the remote control signalfreceiver. The remote control can control at angles of up to ± 30 ° vertically and ± 30 ° horizontally, but the effective controlrange may be reduced.If there are any obstacles between the remote control and the remote control signal receiver, the remote control may notfoperate correctly.You can operate the projector by reflecting the remote control signal on the screen. The operating range may differ due tofthe loss of light caused by the properties of the screen.When the remote control signal receiver is lit with a fluorescent light or other strong light source, the projector may becomefinoperative. Set the projector as far from the luminous source as possible.Projector body■ Bottom view15 642 371191012WARNINGKeep your hands and other objects away from the air exhaust port.Keep your hand and face away.fDo not insert your finger.fKeep heat-sensitive articles away.fHeated air from the air exhaust port can cause burns or external damage.13AttentionDo not block the ventilation ports (intake and exhaust) of the projector.f822 - ENGLISHChapter 1 Preparation - About your projector