|
The items will switch each time you press the button.f[SXGA] The image will be displayed completely when it is set to [SXGA].[SXGA +] The image will be displayed incompletely when it is set to [SXGA +].[P-TIMER]Set and operate the presentation timer function.Press1) as to select [P-TIMER].Press the button.2)The [P-TIMER] screen is displayed.f[MODE] Switches the elapsed time between [COUNT UP] and [COUNT DOWN].[TIMER] Sets the finish time of timer when [COUNT DOWN] is selected.[START] / [STOP] /[RESTART] Operates the timer.[RESET] Resets the count.[EXIT] [P-TIMER] is finished.Setting [MODE]Press1) as to select [MODE].Press2) qw to switch the item.The items will switch each time you press the button.f[COUNT UP] Displays the elapsed time from count started.[COUNT DOWN] Displays the remaining time for the time in set in [TIMER] menu.Setting the countdown timerPress1) as to select [TIMER].Press2) qw to set the timer.The timer can be set from 1 to 180 minutes in 1 increment.fThe factory default setting is 10 minutes.fNote[TIMER] is available only when [MODE] is set to [COUNT DOWN].fThe operation of [P-TIMER]Press1) as to select [START], [STOP] or [RESTART].[START] Starts counting.[STOP] Stops counting.[RESTART] Restarts counting.Press the button.2)When you select [START] or [RESTART], the remaining time or the elapsed time will be displayed in the lower right offthe projected image.When you select [STOP], the remaining time or the elapsed time while stopping the counting will be displayed in theflower right of the projected image.When [RESTART] is selected, then go to step 3).fPress the 3)The start time will be displayed in the lower right of the projected image.fNoteYou can also use the P-TIMER function by pressing the button on the remote control (f Æ page 42).If the elapsed time or remaining time is displaying, the text will not be displayed even when the [SECURITY] menu → [TEXTfDISPLAY] (Æ page 74) is set to [ON].The elapsed time or remaining time will not be display when the Menu screen is displaying.fThe start time will be "000:00" when [MODE] is set to [COUNT UP].f64 - ENGLISHChapter 4 Settings - [DISPLAY OPTION] menu
|
