[TV-SYSTEM](Only when the /The projector will automatically detect the input signal, but you can set the color system manually when an unstable signal isinput. Set the color system matching the input signal.Press1) as to select [TV-SYSTEM].Press2) qw or the button.The [TV-SYSTEM] individual adjustment screen is displayed.fPress3) qw to select the color system.The items will switch each time you press the button.fSelect among [AUTO], [NTSC], [NTSC4.43], [PAL], [PAL-M], [PAL-N], [PAL60] and [SECAM].fSet it to [AUTO] normally. (Setting [AUTO] will automatically select [NTSC], [NTSC4.43], [PAL], [PAL-M], [PAL-N],f[SECAM] or [PAL60].[RGB/YPB PR ]/[RGB/YC B C R ]Set it to [AUTO] normally. If images are not displayed correctly when this is set to [AUTO], set either [RGB] or [YCBC R], [YPBPR]in accordance with the input signal.Press1) as to select [RGB/YPB PR ] or [RGB/YCB C R ].Press2) qw or the button.The [RGB/YPf BPR] or [RGB/YCBC R] individual adjustment screen is displayed.Press3) qw to switch the item.The items will switch each time you press the button.f[AUTO] The sync signal automatically selects the signal [RGB]/ [YPBPR]/[YCBC R].[RGB] Select it for RGB signal input.[YP B P R ] Select it for YPBPR signal input.[YC B C R ] Select it for YCBC R signal input.When the terminal is selectedFor 525i (480i), 625i (576i), 525p (480p) and 625p (576p) inputfSelect [AUTO], [RGB] or [YCBC R].For other movie-based signal inputfSelect [AUTO], [RGB] or [YPBPR].When the terminal is selectedFor 525p (480p) and 625p (576p) inputfSelect [AUTO], [RGB] or [YCBC R].For other movie-based signal inputfSelect [AUTO], [RGB] or [YPBPR].NoteRefer to “List of compatible signals” (f Æ pages 107-108) for the signal details.The signal selection may not function properly depending on connected devices.fENGLISH - 53Chapter 4 Settings - [PICTURE] menu
