[TEST PATTERN]Displays the test pattern built-in to the projector.Settings of position, size, and other factors will not be reflected in test patterns. Make sure to display the input signal beforeperforming various adjustments.Press1) as to select [TEST PATTERN].Press the button.2)The [TEST PATTERN] screen is displayed.fPress3) qw to switch the items.The items will switch each time you press the button.fALL WHITE → COLOR BARS → WHITE CROSS ON BLACK BACKGROUND → BLACK CROSS ON THE WHITEBACKGROUND → CROSS HATCH → ALL WHITE...When you press the fNoteThe initial setting is ALL WHITE. The initial screen is CROSS HATCH if you have assigned it to the button.f[FILTER COUNTER]This function is used to reset the filter use time and set the notification display.Press1) as to select [FILTER COUNTER].Press the button.2)The [FILTER COUNTER] screen is displayed.f[FILTER COUNTER] Displays the using time of the filter.[TIMER] Sets the timer when you want to display an alert message of filter replacement.[FILTER COUNTERRESET] Resets the filter counter.Setting [TIMER]Press1) as to select [TIMER].Press2) qw to switch the setting of the timer.The items will switch each time you press the button.f[OFF] → [1000 H] → [2000 H] → [3000 H] → [4000 H] → [5000 H] → [6000 H][FILTER COUNTER RESET]Press1) as to select [FILTER COUNTER RESET].The [FILTER COUNTER RESET] screen is displayed.zPress the button.2)When the confirmation is displayed, press3) qw to select [OK] and then press the button.[INITIALIZE ALL]Return various setting values to their factory default settings.Press1) as to select [INITIALIZE ALL].The [INITIALIZE ALL] screen is displayed.zPress the button.2)When the confirmation is displayed, press3) qw to select [OK] and then press the button.The [POWER OFF] screen is displayed.zPress the button.4)The operation is disabled except for turning off the power.zNoteThe projector will enter into the standby status to reflect the setting values when [INITIALIZE ALL] is executed.f72 - ENGLISHChapter 4 Settings - [PROJECTOR SETUP] menu
