[DAYLIGHT VIEW]You can correct the image to the optimal vividness even if it is projected under a bright light.Press1) as to select [DAYLIGHT VIEW].Press2) qw or the button.The [DAYLIGHT VIEW] individual adjustment screen is displayed.fPress3) qw to switch the item.The items will switch each time you press the button.f[AUTO] Enables auto correction of [DAYLIGHT VIEW]. The luminance sensor detects the brightness and color of thesurroundings and automatically corrects the video display.[ON] Enables [DAYLIGHT VIEW].[OFF] Disables [DAYLIGHT VIEW].Note[DAYLIGHT VIEW] can not be set to [AUTO] when the [PROJECTOR SETUP] menu → [PROJECTION METHOD] is set tof[REAR/DESK] or [REAR/CEILING].The [AUTO] mode may not function properly if an object is placed on the top of the projector.f[DIGITAL CINEMA REALITY](Only for movie-based signal)You can improve the vertical resolution of 2-2 and 2-3 pulldown video.This function is available only with the following signal inputs.525i (480i), 625i (576i), 1125 (1080)/60i, 1125 (1080)/50i, 1125 (1080)/24sF, S-VIDEO signal, VIDEO signal.Press1) as to select [DIGITAL CINEMA REALITY].Press2) qw or the button.The [DIGITAL CINEMA REALITY] individual adjustment screen is displayed.fPress3) qw to switch the item.The items will switch each time you press the button.f[ON] Enables [DIGITAL CINEMA REALITY].[OFF] Disables [DIGITAL CINEMA REALITY].[NOISE REDUCTION](Only when the /You can reduce noises when the input image is degraded and noise is occurring in the image signal.Press1) as to select [NOISE REDUCTION].Press2) qw or the button.The [NOISE REDUCTION] individual adjustment screen is displayed.fPress3) qw to switch the item.The items will switch each time you press the button.f[ON] Enables [NOISE REDUCTION].[OFF] Disables [NOISE REDUCTION].AttentionWhen this is set for an input signal with less noise, the image may look different from what it originally was. In such a case,fset it to [OFF]52 - ENGLISHChapter 4 Settings - [PICTURE] menu
