Panasonic ProLine AG-1340 Operating Instructions Manual

17Setting UpSetting the Clock of your VCRThe built-in digital clock is used to activate thetimer for automatic recording and must be setto the correct time. It employs the 24-hoursystem.Preparations– Confirm that the TV is on and the VCRviewing channel is selected.– Turn on the VCR.– Press [VCR/TV] to select the VCR mode.Example:Date; 16 October (During daylight savingtime), 2005Time; 20:15VCRAVINPUT SELECT VCR/TVRESETOSD/DISPLAYPICTURE MODE RECTIMERÁNAVIPROG/CHECK SPEEDr Ws XWXSEARCHCANCELINDEXOKAUDIO∫1342 1569 ¥:ÍÍ;/DMENU1 2 3 44 Set each item by pressing 3 or 4 and 1.Press 2 to return to the previous item.Set [Year] to [2005].Set [Month] to [10].Set [Date] to [16].Set [Time] to [20:15].– When it is keptpressed, the indicationchanges in 30-minutesteps.– There is no need topress 1.≥LANGUAGESELECTEND : , OK:MENUOSD MENULANGUAGESELECTEND: , OK:MENUOSD MENUCHANNEL SETOPTION≥CLOCK SETCLOCK SETCHANNEL SETOPTIONM1Y2005D1H:M0:00CLOCK SETSTART :MENUSELECT: ∂/μ:D. S. T. : YES ¡NOD. S. T. : YES ≥NOY2005CLOCK SETM10D16H:M20:15START :MENUSELECT: s/r:D. S. T. : YES ≥NOY2005H:M0:00CLOCK SETM10 D16START :MENUSELECT: s/r:D. S. T. : YES ≥NOM10Y2005D1H:M0:00CLOCK SETSTART :MENUSELECT: s/r:D. S. T. : YES ¡NOM1Y2005 D1 H:M0:00CLOCK SETSTART :MENUSELECT: s/r:5 Press [MENU].– The clock starts.Note:– The clock operates for at least 5 years on itsbackup system in the event of a powerfailure.Time Reset FunctionIf the clock is less than two minutes slow orfast, it can easily be reset to the proper time.Example: Resetting the clock to 12:00.001 Select [CLOCK SET] from the OSD menuand press [OK].2 When the current clock display on the VCRis between 11:58.00 and 12:01.59, press[MENU] as soon as you hear the 12:00.00signal. This resets the time to 12:00.00.Operations1 Press [MENU].2 Select [CLOCK SET] bypressing 3 or 4 andthen press [OK].3 Set [D.S.T.] (DaylightSaving Time) bypressing 3 or 4.– Select [YES] to set daylight saving time.The time on the clock is advanced by1 hour.– Select [NO] to return to standard time. Thetime on the clock is set back by 1 hour.– Press 1 to set each time.– Press [MENU] when not setting each time.