Panasonic ProLine AG-1340 Operating Instructions Manual

29Advanced Operations– The tape length must be set correctly.(See page 19.)– Tapes except T30, -60, -90, -120, -140, -160,-180 tapes may not work correctly.To Activate the Auto SP/EP ChangeFunction:Press [SPEED] to select [A].3 Press 1 to display theCategory. (When [JETNAVIGATOR] is set to[ON].) Press 1 again tomake the previousdisplay appear.Cancelling a Timer Program– The VCR must be turned on, or in timerrecording standby mode.– Confirm that the TV is on and the VCRviewing channel is selected.1 Press [PROG./CHECK] twice.2 Press [VCR/TV] toselect the VCR mode.3 Press [PROG./CHECK]repeatedly.4 Press [CANCEL].Note:– If timer recording is not completed (due toinsufficient tape or cancellation by the user),the programed timer recording data will becancelled from the memory by 4 A.M. twodays later.However, if the timer recording function isactivated at that time, the programed timerrecording data will not be cancelled.VideoTapeTimerProgram-ming90 min.90 min. Recordingby SP mode1st Program(90 min.)2nd Program15 min. Recordingby SP mode30 min.45 min.Recordingby EPmode(60 min.)3rd Program willnot be recorded.Example for T120 tape:CH DATE ON OFFA2 2 0 : 0 2 2 1 : 3 027THCATEGORY : 1CH DATE ON OFF 1/22 27TH 20:02 21:30 SP125 SU-SA 10:30 11:00 A14 SU 15:00 16:00 SP5 19WE 22:15 23:30 EPAV 28FR 20:02 21:30 SP4 30SU 19:10 19:55 EP– – – – – – – –:– – – –:– –– – – – – – – –:– – – –:– –END:MENUSELECT: 112345678CH DATE ON OFF 1/22 27TH 20:02 21:30 SP125 SU-SA 10:30 11:00 A14 SU 15:00 16:00 SP5 19WE 22:15 23:30 EPAV 28FR 20:02 21:30 SP4 30SU 19:10 19:55 EP– – – – – – – –:– – – –:– –– – – – – – – –:– – – –:– –END:MENUSELECT: 112345678CH DATE ON OFF 1/22 27TH 20:02 21:30 SP125 SU-SA 10:30 11:00 A14 SU 15:00 16:00 SP– – – – – – – –:– – – –:– – EPAV 28FR 20:02 21:30 SP4 30SU 19:10 19:55 EP– – – – – – – –:– – – –:– –– – – – – – – –:– – – –:– –END:MENUSELECT: 112345678CH DATE ON OFF 1/22 27TH 20:02 21:30125 SU-SA 10:30 11:0014 SU 15:00 16:005 19WE 22:15 23:30AV 28FR 20:02 21:304 30SU 19:10 19:55– – – – – – – –:– – – –:– –– – – – – – – –:– – – –:– –END:MENUSELECT: 112345678– Every time you press [SPEED], the indicationchanges in the following order:SP>EP>A>SPChecking a Timer Program– The VCR must be turned on, or the timerrecording indicator “Á” lit.– Confirm that the TV is on and the VCRviewing channel is selected.1 Press [PROG./CHECK]twice.– Every time you press[PROG./CHECK], theprogram shifts below.2 Press [VCR/TV] toselect the VCR mode.CH DATE ON OFF 1/22 27TH 20:02 21:30 SP125 SU-SA 10:30 11:00 A14 SU 15:00 16:00 SP5 19WE 22:15 23:30 EPAV 28FR 20:02 21:30 SP4 30SU 19:10 19:55 EP– – – – – – – –:– – – –:– –– – – – – – – –:– – – –:– –END:MENUSELECT: 112345678