Panasonic ProLine AG-1340 Operating Instructions Manual

25Basic OperationsTVVCRVOLUMEAVINPUT SELECT VCR/TVRESETOSD/DISPLAYPICTURE MODE RECTIMERÁNAVIPROG/CHECK SPEEDONrsOFFrsDATErrsWWXs XWXSEARCHCANCELINDEXOKAUDIO∫1342 1569 ¥:ÍÍ;/DMENU1 2 3 4SPTo Select the Desired TapeSpeedPress [SPEED] beforerecording.To Interrupt RecordingPress [PAUSE/SLOW]during recording.Press it again to continuerecording.To View One TV Program whileRecording Another One1 Refer to steps 1–4 of the manual recordingoperation.2 Press [VCR/TV] to select the TV mode.3 Select the TV program on your TV that youwish to view now.To Display the ApproximateRemaining Tape Time1 Select [TAPE SELECT]from the on screendisplay and select thecorresponding videocassette tape length.See page 19.RECOSD ≥ON OFFTAPE SELECT≥T120 T160 T180BLUE BACK ≥ON OFFJET NAVIGATOR ≥ON ≥OFFDELETE NAVIDATA ≥NO YESJET SEARCH x27 ≥x35OPTIONEND :MENUSELECT : s/r:REMAINT120: For T30, -60, -90 and -120 tapes.T160: For T140 and -160 tapes.T180: For T180 tape.2 Press [OSD/DISPLAY].The display changes as follows each time[OSD/DISPLAY] is pressed.Clock>Counter>Remaining Tape Time>Clock– The remaining tape time may not bedisplayed correctly depending on the tapeused.Notes:– When a video cassette with a broken offerasure prevention tab is inserted, the 1indication will flash to indicate that recordingis not possible even if [REC (REC/OTR)] ispressed.– The recording pause mode will beautomatically released after 5 minutes, andthe VCR will return to the stop mode.