28In step 3, select the desired days by pressing[DATE s].For example, CTimer Recording from anExternal Signal SourceIf timer recording is performed by a unitconnected to the audio/video input sockets,select the AV input indicator in step 2 for theprogram position.Setting other Programs inSuccessionRepeat steps 1–8.Selecting the Desired TapeSpeedPress [SPEED] to make the selection in any ofsteps 1–5.Programming a TimerRecording of a TV Program Untilits End(Auto SP/EP Change Function )If, during a timer recording performed in the SPmode, the VCR determines that the remainingtape time is insufficient to record the programto its end, the Auto SP/EP Change functionautomatically changes the tape speed to EP toensure that the whole program will be recorded.Depending on the remaining tape length,recording may be performed in the EP modefrom the start. However, if the remaining tapetime is still not sufficient in this case, theprogram cannot be recorded to the end.– Alternatively, you can set the category onthe Navigator list. (See page 31 for details.)– This function is activated when [JETNAVIGATOR] is set to [ON]. (See page19.) When [JET NAVIGATOR] is set to[OFF], proceed to the step 8.7 Press [MENU] to makethe previous displayappear.8 To activate timerrecording, press [TIMER].– When [JET NAVIGATOR] is set to [ON],the [PROGRAM IS COMPLETEDREMAINING PROGRAM 49] messageappears. (See page 19.)– When [JET NAVIGATOR] is set to [OFF],the [PROGRAM IS COMPLETED]message appears. (See page 19.)– The VCR will be set to the timer recordingstandby mode after about 1 minute if[TIMER] is not pressed.Weekly Timer RecordingIn step 3, select the desired day by pressing[DATE s].For example, SU (Sunday)(SUuSunday, MOuMonday, TUuTuesday,WEuWednesday, THuThursday, FRuFriday,SAuSaturday)Daily Timer RecordingFor this timer function, several groups of dayscan be selected.A Daily recording from Monday to Friday(MO–FR)B Daily recording from Monday to Saturday(MO–SA)C Daily recording from Sunday to Saturday(SU–SA)CH DATE ON OFFSP2 2 0 : 0 2 2 1 : 3 027THCHECK : PROG/CHECKCATEGORYCH DATE ON OFFSP2 – – : – – – – : – –SU: 1CATEGORYCH DATE ON OFFSP2 – – : – – – – : – –SU-SA: 1CATEGORYCH DATE ON OFFSPAV – – : – – – – : – –– – – –: 1CH DATE ON OFFEP2 2 0 : 0 2 2 1 : 3 027THCATEGORY : 1