Section 700 - Operation Chapter 4. User MaintenanceS-ICX-50-700 S-ICX (International) issued October 2000 103Considerations• N/ASet System Date/Time/DayDescriptionThe System allows you to change the date, time, and day of week. When setting the time, you canspecify 12 or 24 hour format.OperationTo change the system date, time, and day of week:Action Result1. If not already in User Maintenance mode, enter User Main-tenance mode. (See “To enter User Maintenance mode:” onpage 75.)81-User MAINT displays2. At the 81 level, enter 000.3. Press the HOLD key. 0 :YYMMDDDate displays4. Enter the year (two characters), month (two characters), andday (two characters).Note: To clear an entry or existing data, press the FL/Rkey.5. Press the HOLD key. 1 :HHMMTime displays6. Enter the hour (two characters) and minute (two characters).Note: To clear an entry or existing data, press the FL/Rkey.7. Press the HOLD key. 2 :Day of the Week displays8. Enter the day of week where:1 = Mon, 2 = Tues., 3 = Wed., 4 = Thurs., 5 = Fri., 6 = Sat.,0 = Sun.Note: To clear an entry or existing data, press the FL/Rkey.9. Press the HOLD key to store the entry.10. To return to the top menu level (81), press the PROG key.OR...To exit the User Maintenance mode, press the ON/OFFkey.81-User MAINT displaysOR...ON/OFF LED goes off
