78 S-ICX (International) issued October 2000 S-ICX-50-700Chapter 4. User Maintenance Section 700 - OperationHardware Requirements• N/AConsiderations• N/ASet Call Forward ID Codes for Voice MailDescription(For a description of Call Forward ID codes for Voice Mail, see “Call Forward ID Code for VoiceMail” on page 68.)Voice Mail Call-Forward ID codes are used by voice mail systems to identify the correct mail box forstoring messages. The actual entry needed will vary by voice mail systems and configuration. Oftenthe entry is the extension number.OperationTo set the Call Forward ID code:10. To set Call Forward Busy destinations for additionalextensions, press the volume up and down key or press theHOLD key to move to the desired Extension.11. Repeat steps 9-11 until all extension are entered.12. Press the MEMORY key to exit the entry mode.13. To return to the top menu level (81), press the PROG key.OR...To exit the User Maintenance mode, press the ON/OFFkey.81-User MAINT displaysOR...ON/OFF LED goes offAction Result1. If not already in User Maintenance mode, enter User Main-tenance mode. (See “To enter User Maintenance mode:” onpage 75.)81-User MAINT displays2. At the 81 level, enter 05.3. Press the HOLD key. 8105-C.FWD ID Code displays4. Press the HOLD key. CF ID-EXT Number displays5. Dial the extension number.6. Press the HOLD key. CF-ID EXT XXX displays (whereXXX = extension number)Action Result
