272 S-ICX (International) issued October 2000 S-ICX-50-700Chapter 7. SLT Features Section 700 - OperationOperationTo set Call Forwarding - All Calls:To cancel Call Forwarding - All Calls:Call Forwarding - BusyWhen Call Forwarding - Busy is set, all incoming calls to a busy extension are forwarded.Action Result1. Lift the handset. Intercom dial tone2. Enter the appropriate Set Call Forwarding code:• For your extension, enter 721 (UK/HK) or 721# (Taiwan,Malaysia, indonesia).• For another extension, enter 731 (UK/HK) or 731# (Tai-wan, Malaysia, Indonesia).3. If setting Call Forwarding for another extension, dial thenumber of the extension whose calls you wish to forward.4. Enter the destination number:• If forwarding to another extension, dial the extensionnumber.• If forwarding to an outside number, press the # key thenenter the SSD bin number.Note: Any outside number used for Call Forwarding mustalready be programmed into speed dialling. (For instruc-tions, see “Speed Dialling” on page 276.)5. Replace the handset.Action Result1. Lift the handset. Intercom dial tone2. Enter the appropriate Cancel Call Forwarding code:• For your extension, enter 731 (UK/HK) or 731# (Taiwan,Malaysia, Indonesia).• For another extension, enter 751 (UK/HK) or 751# (Tai-wan, Malaysia, Indonesia).3. If cancelling Call Forwarding for another extension, enterthe extension number.4. Replace the handset.
