252 S-ICX (International) issued October 2000 S-ICX-50-700Chapter 6. DSLT Features Section 700 - OperationTo dial an SSD number by entering the speed dial bin number:To delete an SSD number:Hardware Requirements• N/AConsiderations• The system can be programmed to allow SSD Numbers to override toll restrictions.Speed Dial LinkingYou can automatically link together up to 5 SSD numbers in 1 PSD bin to handle telephone numberslonger than 24 characters. You can then dial the entire number by pressing the programmed PSD keyor by entering the speed dial bin number.Alternatively, any combination of PSDs and SSDs can be manually linked together by pressing thekeys in the desired sequence. This can be useful for prepending account codes or long distance carrieraccess codes, etc.3. Enter the SSD bin number (00-79 or 000-799).4. Dial the phone number.5. Press the HOLD key.6. Replace the handset or press the ON/OFF key.Action Result1. Lift the handset or press the ON/OFF key. Intercom dial tone2. If necessary, access an outside line. Outside dial tone3. Press the MEMORY key.OR...Enter the Speed Dial Originate code (default = 80).4. Enter the SSD bin number (00-79 or 000-799).5. Complete call and replace the handset or press the ON/OFFkey.Action Result1. Lift the handset or press the ON/OFF key. Intercom dial tone2. Enter the Speed Dial Set/Clear code (default = 710 [UK/HK] or 710# [Taiwan, Malaysia, Indonesia]).3. Enter the SSD bin number (00-79 or -799).4. Press the HOLD key.5. Replace the handset or press the ON/OFF key.Action Result
