Section 700 - Operation Chapter 7. SLT FeaturesS-ICX-50-700 S-ICX (International) issued October 2000 273To set Call Forwarding - Busy:To cancel Call Forwarding - Busy:Call Forwarding - No AnswerWhen Call Forwarding - No Answer is set, a call will ring until the Call forward No Answer timerexpires. When the timer expires, the unanswered call is forwarded.Action Result1. Lift the handset. Intercom dial tone2. Enter the appropriate Set Call Forwarding code:• For your extension, enter 722 (UK/HK) or 722# (Taiwan,Malaysia, Indonesia).• For another extension, enter 742 (UK/HK) or 742# (Tai-wan, Malaysia, indonesia).3. If setting Call Forwarding for another extension, dial thenumber of the extension whose calls you want to forward.4. Enter the destination number:• If forwarding to another extension, dial the extensionnumber.• If forwarding to an outside number, press the # key thenenter the SSD bin number.Note: Any outside number used for Call Forwarding mustalready be programmed into speed dialling. (For instruc-tions, see “Speed Dialling” on page 276.)5. Replace the handset.Action Result1. Lift the handset. Intercom dial tone2. Enter the appropriate Cancel Call Forwarding code:• For your extension, enter 732 (UK/HK) or 732# (Taiwan,Malaysia, Indonesia).• For another extension, enter 752 (UK/HK) or 752# (Tai-wan, Malaysia, Indonesia).3. If cancelling Call Forwarding for another extension, dial theextension number.4. Replace the handset.
