256 S-ICX (International) issued October 2000 S-ICX-50-700Chapter 6. DSLT Features Section 700 - OperationOperationTo use Step Call (Reset Call) to dial another extension (after a busy extension):Example: You dial extension 213, but it is busy. To dial extension 214, enter 4.Hardware Requirements• N/AConsiderations• The second extension called using the Step Call (Reset Call) feature must have the same numberof digits as the first extension.• If you program the System for Step Call (Reset Call), the following features are not available:Camp-on (Ext. no. + 2 [UK/HK] or 2# [Taiwan, Malaysia, Indonesia]), Callback Request (Ext.no. + 3 [UK/HK] or 3# [Taiwan, Malaysia, Indonesia]), Message Waiting (Ext. no. + 4 [UK/HK]or 4# [Taiwan, Malaysia, Indonesia], Message Waiting (Priority for VM) (Ext. no. + 5 [UK/HK]or 5# [Taiwan, Malaysia, Indonesia]), Intercom Busy Override (Ext. no. + 9 [UK/HK] or 9#[Taiwan, Malaysia, Indonesia]).Timed Reminder CallDescriptionYour telephone can act as an alarm clock with the Timed Reminder Call feature.OperationTo set the Timed Reminder Call feature:Action Result1. Lift the handset or press the ON/OFF key. Intercom dial tone2. Dial an extension number. Busy tone3. Dial the last digit of the next extension number.Action Result1. Lift the handset or press the ON/OFF key. Intercom dial tone2. Enter the Timed Reminder Set code (default = *31).3. Enter the time you want the Timed Reminder Call to sound.(Enter the time in 24-hour format. For example, 0100 for 1AM, 1300 for 1 PM.)4. Replace the handset or press the ON/OFF key.
