Section 700 - Operation Chapter 5. Key Telephone FeaturesS-ICX-50-700 S-ICX (International) issued October 2000 119Toll Restriction Service (TRS) (Call Barring) Class assignment so that, when entered, they willoverride the extension’s TRS (Call Barring) Class. Thus, Verified Account Code users can “float”from phone to phone, placing calls that would normally be restricted on that phone.Non-Verified Account CodesNon-verified Account codes are voluntary codes. (i.e., You do not have to enter an account codebefore making a call.)You can assign Non-verified Account codes to both incoming and outgoing calls. To assign anaccount code to an outgoing call, you enter the account code before making the call or during the call.To assign an account code to an incoming call, you enter the account code during the call.OperationTo enter an account code before making a call:To enter an account code during an outside call:Verified Account CodesStations restricted from outside call origination by TRS (Call Barring) can be allowed to makeoutgoing calls by entering a Verified Account code that changes the TRS (Call Barring). After a call ismade, the Call Logging record for the call will show the verified account code.Action Result1. Lift the handset or press the ON/OFF key. Intercom dial tone2. Enter the Account Code feature code (default = 8#). Enter Account # displays3. Enter the Account Code (up to 10 digits). Specified account code displays4. Press the # key. Specified account code # displays5. Press a vacant trunk key or enter a Trunk Access Code(default = 9 [UK/HK] or 0 [Taiwan, Malaysia, Indonesia]).CO Trunk Key LED lights6. Dial the phone number. Dialled phone number displaysAction Result1. During a call, press the MEMORY key.2. Press the # key. Enter Account # displays3. Enter the Account Code (up to 10 digits). Specified account code displays4. Press the # key. Display returns to call state.
