294 S-ICX (International) issued October 2000 S-ICX-50-700Chapter 7. SLT Features Section 700 - OperationOperationAfter receiving an offhook signal during a call:ORNOTE: The steps outlined above can be performed only when the necessary settings have beenprogrammed into the system.Hardware Requirements• N/ARelated Programming• FF3: Trunk Off-Hook Signal• FF1-1: Off-Hook Signal TimerConsiderations• The trunk call type may be either multiple ring, or DDI/DIL whose destination is set to Autocamp-on (Call Waiting).• Offhook signalling is not supported for an ISDN terminal.• The System does not send the offhook signal under the following conditions:• During a conference call• During an OHVA or Busy Override• Data Privacy is enabled• Receiving telephone is a 3rd party voice mail.Offhook Voice AnnounceDescriptionYou can interrupt a busy extension when making an Intercom Call, and then use the Off-Hook VoiceAnnounce (OHVA) feature to make an announcement.Action Result1. Complete the first call and place the handset on hook. First call is terminated.2. After the telephone rings, go off hook. Incoming call is answered.Action Result1. Press and release the hook quickly (hookflash). First call is placed on hold; incoming callconnects.2. Press and release the hook quickly to go back to theoriginal call.First call connects again.
