Others101LSQT1210The indicationdisappears.The screen is frozen.No operation can beperformed.≥ Is this unit connected to a computer?# No operation can be performed on this unit when it is connectedto a computer.≥ Turn off the power to this unit. If the power cannot be turnedoff, remove the SD card then press the RESET button, orremove the battery or AC adaptor and then reattach it. Afterthat, turn on the power again. If normal operation is still notrestored, detach the power connected, and consult the dealerwho you purchased this unit from.“PUSH THE RESETSWITCH.” is displayed.≥ The unit has automatically detected an error. Remove the SDcard then press the RESET button to restart the unit.# (SDR-H250) Press the RESET button with the projecting part ofthe grip belt A.# (SDR-H20) Press the RESET button with the projecting part ofthe lens cap B.≥ If you do not press the RESET button, the power to this unit isturned off automatically about 1 minute later.≥ Even after you press the RESET button, the indication may stillappear repeatedly. If so, this unit needs repair. Detach thepower connected, and consult the dealer who you purchasedthis unit from. Do not attempt to repair the appliance byyourself.If the SD card is insertedin this unit, it is notrecognised.≥ Is the SD card formatted on a computer inserted?# Use this unit to format SD cards. Please be aware that if an SDcard is formatted, then all the data recorded on the card will beerased. (l 69)If the SD card is insertedin another device, it is notrecognised.≥ Check that the device is compatible with the capacity or type ofSD card (SD Memory Card/SDHC Memory Card) that youinserted.# Refer to the operating instructions of the device for details.Problem Check pointsABLSQT1210_EP(EN).book 101 ページ 2007年2月9日 金曜日 午後6時0分