74LSQT1210With other products3 Select a file to be printed, thenpress the joystick.The number of pictures set is displayed.4 Move the joystick up or down toselect the desired number ofprints, then press the joystick.≥ You can set up to 9 prints.≥ To cancel the setting, set the number of printsto [0].≥ Up to 8 files displayed on a page can be set insuccession by repeating steps 3 and 4.5 Press the MENU button todisplay the PictBridge menus.6 Select the date print setting on[DATE PRINT].≥ If the printer is not capable of date printing, thissetting is unavailable.7 Select the paper size setting on[PAPER SIZE].≥ You cannot set paper sizes not supported onthe printer.8 Select the layout setting on[PAGE LAYOUT].≥ You cannot set page layouts not supported onthe printer.9 Select [PRINT] # [YES] andpress the joystick.The pictures are printed.≥ Exit PictBridge by disconnecting the USB cableafter the pictures have been printed.When you want to stop printing halfwayMove the joystick down.A confirmation message appears. If [YES] isselected, the number of prints set is cancelledand the screen returns to step 3. If [NO] isselected, all the settings are kept and the screenreturns to step 3.≥ Avoid the following operations during printing.These operations disable proper printing.jDisconnecting the USB cablejOpening the card slot coverjSwitching the mode dialjTurning off the power≥ Check the settings for the paper size, quality ofprint, etc. on the printer.≥ The sides of pictures recorded when [ ](SDR-H250)/[ ] (SDR-H20) is set may becut at printing. Check before printing.When using a printer with a trimming orborderless printing function, cancel thisfunction before printing. (Refer to the operatinginstructions of the printer for details.)[STANDARD]: Size specific to the printer[4t5 INCH]: L size[5t7 INCH]: 2L size[4t6 INCH]: Postcard sizeMENU[A4]: A4 size[STANDARD]: Layout specific to the printer[ ]: No frame print[ ]: Frame print20.2LSQT1210_EP(EN).book 74 ページ 2007年2月9日 金曜日 午後6時0分