44LSQT1210Recording≥ Video recording mode≥ Picture recording mode≥ The subject should be within 1.3 m of the unit.≥ Using the video light reduces battery time.≥ Set the video light to off when not in use.≥ Do not look directly into the light.≥ Using the colour night view function at thesame time will make conditions even brighter.≥ The video light enables brightening of theimages taken in a dimly-lit place. We alsorecommend using it in a bright place to obtainhigh quality images.≥ If you turn off the power or operate the modedial, the video light is turned off.[HDD] [SD]Use this function when the light is emanatingfrom behind the subject and the subject appearsdark.¬ Rotate the mode dial to select or.1 Press the joystick. Then movethe joystick down to display theicon shown in the illustration.2 Move the joystick up to select[ª].The image on the screen will become brighter.To return to normal recordingSelect [ª] again.≥ If you turn off the power or operate the modedial, the backlight compensation function iscancelled.[HDD] [SD]Fade in:The image and audio gradually appear.Fade out:The image and audio gradually disappear.¬ Rotate the mode dial to select .1 Press the joystick. Then movethe joystick down to display theicon shown in the illustration.Backlight compensationfunctionThis is for protecting a backlit subjectfrom being darkened.A B CrB CFade in/fade out function1/21/2 NEXTNEXT1/2 NEXT1/21/2 NEXTNEXT1/2 NEXT1/21/2 NEXTNEXT1/2 NEXTLSQT1210_EP(EN).book 44 ページ 2007年2月9日 金曜日 午後6時0分